Questions for Jim Weir

[George McLeod]

Hello Jim,
Would appreciate your comments, if any, on the following but only if it it
will only take about a minute of your time.

Re Collions 476X-3 Transponder Test Set
What is difference between the -1 and the -3 units?
Is the interrogation process initiated by an internal timer in the test set
as there appears to be not any "press to test"?
AND if RST is involved with magnetoes, what equipment do you use to comply
with the 50 Gohm capacitor leakage test required by Slick?
With thanks

[RST Engineering]

Sorry, I have absolutely no answers to either of these two questions...would
if I could.

Jim

--
"If you think you can, or think you can't, you're right."
--Henry Ford

"George McLeod" > wrote in message
u...
> Hello Jim,
> Would appreciate your comments, if any, on the following but only if it it
> will only take about a minute of your time.
>
> Re Collions 476X-3 Transponder Test Set
> What is difference between the -1 and the -3 units?
> Is the interrogation process initiated by an internal timer in the test
> set
> as there appears to be not any "press to test"?
> AND if RST is involved with magnetoes, what equipment do you use to comply
> with the 50 Gohm capacitor leakage test required by Slick?
> With thanks
>
>