Hole template or Drawing for Altimeter

[Craggy Aero]

I am looking for a drawing for the instrument panel hole for a 3 1/8
altimeter.

Thanks in advance.

Richard
www.craggyaero.com

[Gig 601XL Builder]

Craggy Aero wrote:
> I am looking for a drawing for the instrument panel hole for a 3 1/8
> altimeter.
>
> Thanks in advance.
>
> Richard
> www.craggyaero.com

I'm pretty sure there is one in the ACS catalog and it is available online
in .pdf format.

[Scott[_1_]]

If you want to do it the hard way (like I always like to do!), you can
just cut out a 3-1/8" hole (if it's a 3-18" altimeter) and file the
notch very slowly to fit the adjusting knob...

Scott


Gig 601XL Builder wrote:
> Craggy Aero wrote:
>
>>I am looking for a drawing for the instrument panel hole for a 3 1/8
>>altimeter.
>>
>>Thanks in advance.
>>
>>Richard
>>www.craggyaero.com
>
>
> I'm pretty sure there is one in the ACS catalog and it is available online
> in .pdf format.
>
>

--
Scott
http://corbenflyer.tripod.com/
Gotta Fly or Gonna Die
Building RV-4 (Super Slow Build Version)

[[email protected]]

I had it. Please sent me an Email. I will give it to you.
My Email:

Luo
http://www.ming-da.com


Craggy Aero $B<LF;!'(B
> I am looking for a drawing for the instrument panel hole for a 3 1/8
> altimeter.
>
> Thanks in advance.
>
> Richard
> www.craggyaero.com

[[email protected]]

I had sent it into your Email. Please check it.

Luo
http://ww.ming-da.com

Craggy Aero $B<LF;!'(B
> I am looking for a drawing for the instrument panel hole for a 3 1/8
> altimeter.
>
> Thanks in advance.
>
> Richard
> www.craggyaero.com

[[email protected]]

I had sent it into your Email.

Luo

ŽÊ“¹�F
> I had it. Please sent me an Email. I will give it to you.
> My Email:
>
> Luo
> http://www.ming-da.com
>
>
> Craggy Aero $B<LF;!'(B
> > I am looking for a drawing for the instrument panel hole for a 3 1/8
> > altimeter.
> >
> > Thanks in advance.
> >
> > Richard
> > www.craggyaero.com