HP-18 Approach

[Wayne Paul]

I tried to load this earlier today; however, it was too large (3.3 megs). I
have placed it on my website and will keep it there for about a week.
http://www.soaridaho.com/F18WIRE.mpg

Wayne
HP-14 "6F"
http://www.soaridaho.com/Schreder

[Dave Kearton]

Wayne Paul wrote:
>> I tried to load this earlier today; however, it was too large (3.3
>> megs). I have placed it on my website and will keep it there for
>> about a week. http://www.soaridaho.com/F18WIRE.mpg
>>
>> Wayne
>> HP-14 "6F"
>> http://www.soaridaho.com/Schreder



Interesting how snagging the wire makes the wreckage slide down the
centreline - and not in its original direction down the angled deck.



Also, FWIW, you can break apart messages that are too large for your server
by following the details below....


You may have to experiment a little to find what your largest message size
is for your server, 1300Kb worked for me after a couple of guesses.





--

Cheers

Dave Kearton

[Wayne Paul]

Dave,

I really hadn't investigated how large attachments were parsed into several
messages.

Thank you for the guidance.

Wayne
HP-14 "6F"
http://www.soaridaho.com/


"Dave Kearton" > wrote in message
...
> Wayne Paul wrote:
>>> I tried to load this earlier today; however, it was too large (3.3
>>> megs). I have placed it on my website and will keep it there for
>>> about a week. http://www.soaridaho.com/F18WIRE.mpg
>>>
>>> Wayne
>>> HP-14 "6F"
>>> http://www.soaridaho.com/Schreder
>
>
>
> Interesting how snagging the wire makes the wreckage slide down the
> centreline - and not in its original direction down the angled deck.
>
>
>
> Also, FWIW, you can break apart messages that are too large for your
> server
> by following the details below....
>
>
> You may have to experiment a little to find what your largest message size
> is for your server, 1300Kb worked for me after a couple of guesses.
>
>
>
>
>
> --
>
> Cheers
>
> Dave Kearton
>
>
>

[Dave Kearton]

Wayne Paul wrote:
>> Dave,
>>
>> I really hadn't investigated how large attachments were parsed into
>> several messages.
>>
>> Thank you for the guidance.
>>
>> Wayne
>> HP-14 "6F"
>> http://www.soaridaho.com/
>>


No probs, thanks for the pics.



--

Cheers

Dave Kearton

[Wayne Paul]

"Wayne Paul" > wrote in message
...
>I tried to load this earlier today; however, it was too large (3.3 megs).
>I have placed it on my website and will keep it there for about a week.
> http://www.soaridaho.com/F18WIRE.mpg


I guess I have been flying sailplanes too long. (An HP-18 is a sailplane.)
The subject line should have been "F-18 Approach".

Wayne
HP-14 "6F"
http://www.soaridaho.com/Schreder

[Dave Kearton]

Wayne Paul wrote:
>> "Wayne Paul" > wrote in message
>> ...
>>> I tried to load this earlier today; however, it was too large (3.3
>>> megs). I have placed it on my website and will keep it there for
>>> about a week. http://www.soaridaho.com/F18WIRE.mpg
>>
>>
>> I guess I have been flying sailplanes too long. (An HP-18 is a
>> sailplane.) The subject line should have been "F-18 Approach".
>>
>> Wayne
>> HP-14 "6F"
>> http://www.soaridaho.com/Schreder




It took my attention because I thought it may have been a printer...




I took a sailplane ride a few years ago. Must admit, I was more than a
little distracted by the girl strapping me in. Maybe that's a
deliberate ploy by the gliding club to stop the old guys from getting
nervous.



Like sex, it's probably the most fun you can have without laughing.



--

Cheers

Dave Kearton

[Wayne Paul]

"Dave Kearton" > wrote in message
...
> Wayne Paul wrote:
>>> "Wayne Paul" > wrote in message
>>> ...
>>>> I tried to load this earlier today; however, it was too large (3.3
>>>> megs). I have placed it on my website and will keep it there for
>>>> about a week. http://www.soaridaho.com/F18WIRE.mpg
>>>
>>>
>>> I guess I have been flying sailplanes too long. (An HP-18 is a
>>> sailplane.) The subject line should have been "F-18 Approach".
>>>
>>> Wayne
>>> HP-14 "6F"
>>> http://www.soaridaho.com/Schreder
>
> It took my attention because I thought it may have been a printer...
>
> I took a sailplane ride a few years ago. Must admit, I was more than a
> little distracted by the girl strapping me in. Maybe that's a
> deliberate ploy by the gliding club to stop the old guys from getting
> nervous.
>
> Like sex, it's probably the most fun you can have without laughing.
>

Dave,

I have attached a few pictures of HP-18s in case you have never seen one.
Talk about a cramped cockpit!!!

Wayne
HP-14 "6F"
http://www.soaridaho.com/Schreder

[Peter Hucker[_2_]]

On Sat, 26 Jan 2008 11:02:14 +1030, "Dave Kearton"
> wrote:

>Wayne Paul wrote:
>>> "Wayne Paul" > wrote in message
>>> ...
>>>> I tried to load this earlier today; however, it was too large (3.3
>>>> megs). I have placed it on my website and will keep it there for
>>>> about a week. http://www.soaridaho.com/F18WIRE.mpg
>>>
>>>
>>> I guess I have been flying sailplanes too long. (An HP-18 is a
>>> sailplane.) The subject line should have been "F-18 Approach".
>>>
>>> Wayne
>>> HP-14 "6F"
>>> http://www.soaridaho.com/Schreder
>
>
>
>
>It took my attention because I thought it may have been a printer...

Best thing to do with an HP printer is to launch it.
--
This message has been brought to you by solar and wind power. Who needs the national grid?
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

China has outlawed sexual harassment.
This will make work conditions much more bearable during those 16 hour days at the sweat shop.