Ventus cM turbulators

[Bert Willing[_2_]]

I need to replace my zig-zags on the horizontal stabilizer, but I would need
to know the required position cordwise (upper and lower surface). I took it
off and cleaned before having a look at the maintainace manual - which does
not give any info on the topic... :-( Any ideas ?

Bert
TW

[Tim Taylor]

On Feb 21, 8:16 am, "Bert Willing" <bw_no_spam_ple...@tango-
whisky.com> wrote:
> I need to replace my zig-zags on the horizontal stabilizer, but I would need
> to know the required position cordwise (upper and lower surface). I took it
> off and cleaned before having a look at the maintainace manual - which does
> not give any info on the topic... :-( Any ideas ?
>
> Bert
> TW

Bert,

The pdf you want is the very last entry on the thread "Ventus A
performance mods" in the Ventus section on Glider Forum. It is the S-
H tech note on installing the Zig-Zag tape.

Tim
TT

[Bert Willing[_2_]]

Great - thanks!

"Tim Taylor" > wrote in message
...
> On Feb 21, 8:16 am, "Bert Willing" <bw_no_spam_ple...@tango-
> whisky.com> wrote:
>> I need to replace my zig-zags on the horizontal stabilizer, but I would
>> need
>> to know the required position cordwise (upper and lower surface). I took
>> it
>> off and cleaned before having a look at the maintainace manual - which
>> does
>> not give any info on the topic... :-( Any ideas ?
>>
>> Bert
>> TW
>
> Bert,
>
> The pdf you want is the very last entry on the thread "Ventus A
> performance mods" in the Ventus section on Glider Forum. It is the S-
> H tech note on installing the Zig-Zag tape.
>
> Tim
> TT
>

[Gary Emerson]

Tim Taylor wrote:
> On Feb 21, 8:16 am, "Bert Willing" <bw_no_spam_ple...@tango-
> whisky.com> wrote:
>> I need to replace my zig-zags on the horizontal stabilizer, but I would need
>> to know the required position cordwise (upper and lower surface). I took it
>> off and cleaned before having a look at the maintainace manual - which does
>> not give any info on the topic... :-( Any ideas ?
>>
>> Bert
>> TW
>
> Bert,
>
> The pdf you want is the very last entry on the thread "Ventus A
> performance mods" in the Ventus section on Glider Forum. It is the S-
> H tech note on installing the Zig-Zag tape.
>
> Tim
> TT
>
What is the tech note - downloaded the files, but wasn't sure I'd found
what was referenced...

[Bert Willing[_2_]]

It's the file on the very last post, describing installation procedures for
wingtape and positions for elevator turbulators on Nimbus/Ventus.

"Gary Emerson" > wrote in message
...
> Tim Taylor wrote:
>> On Feb 21, 8:16 am, "Bert Willing" <bw_no_spam_ple...@tango-
>> whisky.com> wrote:
>>> I need to replace my zig-zags on the horizontal stabilizer, but I would
>>> need
>>> to know the required position cordwise (upper and lower surface). I took
>>> it
>>> off and cleaned before having a look at the maintainace manual - which
>>> does
>>> not give any info on the topic... :-( Any ideas ?
>>>
>>> Bert
>>> TW
>>
>> Bert,
>>
>> The pdf you want is the very last entry on the thread "Ventus A
>> performance mods" in the Ventus section on Glider Forum. It is the S-
>> H tech note on installing the Zig-Zag tape.
>>
>> Tim
>> TT
>>
> What is the tech note - downloaded the files, but wasn't sure I'd found
> what was referenced...

[Stefan[_5_]]

Hi there,

a few years ago someone mentioned an entry in some "Glider Forum" about
"Ventus A perfomance mods".

I'd like to see what that's about, but can't find that Glider Forum.
Maybe it's some sort of non-public member forum?

If someone could just look that up and copy the interesting parts here,
would be cool!

Regards
Stefan


Tim Taylor > wrote in
:

> On Feb 21, 8:16 am, "Bert Willing" <bw_no_spam_ple...@tango-
> whisky.com> wrote:
>> I need to replace my zig-zags on the horizontal stabilizer, but I
>> would need to know the required position cordwise (upper and lower
>> surface). I took it off and cleaned before having a look at the
>> maintainace manual - which does not give any info on the topic... :-(
>> Any ideas ?
>>
>> Bert
>> TW
>
> Bert,
>
> The pdf you want is the very last entry on the thread "Ventus A
> performance mods" in the Ventus section on Glider Forum. It is the
> S- H tech note on installing the Zig-Zag tape.
>
> Tim
> TT
>

[Stefan[_5_]]

found it...

http://web.archive.org/web/20071019043126/http://www.gliderforum.com:80/thr
ead-view.asp?threadid=2161&posts=23

Stefan > wrote in news:XnsA840BCF609F50glamdingwebde@
127.0.0.1:

> Hi there,
>
> a few years ago someone mentioned an entry in some "Glider Forum" about
> "Ventus A perfomance mods".
>
> I'd like to see what that's about, but can't find that Glider Forum.
> Maybe it's some sort of non-public member forum?
>
> If someone could just look that up and copy the interesting parts here,
> would be cool!
>
> Regards
> Stefan

[[email protected]]

Does anyone know why the Ventus 2cM winglets have no turbulators? I see the winglets on the ASW27 do.