PDA

View Full Version : Pawnee/Tost STC


Mike125
March 17th 08, 07:45 PM
Is there an STC for installing a Tost release on a Pawnee?

March 18th 08, 01:45 PM
Not that we can find. Our club has just gone through the hoops to get
tost hooks on our Pawnees. Extensive research could not find a STC.
You have to go the 337 route.

March 18th 08, 03:03 PM
On Mar 17, 8:45*pm, Mike125 > wrote:
> Is there an STC for installing a Tost release on a Pawnee?

Did you try contacting Tost?

Bob

Tim Mara
March 18th 08, 05:27 PM
I have all of the TOST supplied documents on my website page with these
systems.
1st there is no STC for the installation....never has been, the parts and
installation are covered by ESA, JTSO, and FORM One approval and
installations based on TOST documents......yes, you do need a 337 for the
installation.....any installation to modify an aircraft from it's original
purpose....it's been done 100's of times installting TOST and other tow
releases on Pawnees and others...that is just what you have to do....we've
done it on our Pawnees here and had no difficulty getting the FSDO to accept
them
tim
Please visit the Wings & Wheels website at www.wingsandwheels.com

" > wrote in message
...
On Mar 17, 8:45 pm, Mike125 > wrote:
> Is there an STC for installing a Tost release on a Pawnee?

Did you try contacting Tost?

Bob

Google