Grob parts in US...

[Marc Ramsey[_2_]]

Now that Grob no longer has a presence in the US, what are the options
for obtaining parts? In particular, I'm looking for replacement wing
tip skids for a Grob 103C (Twin III)...

Thanks,
Marc

[Frank Whiteley]

On Apr 28, 8:08 pm, Marc Ramsey > wrote:
> Now that Grob no longer has a presence in the US, what are the options
> for obtaining parts? In particular, I'm looking for replacement wing
> tip skids for a Grob 103C (Twin III)...
>
> Thanks,
> Marc

Start here

Fiberglas-Technik
Rudolf Lindner GmbH & Co. KG
Steige 3
88487 Walpertshofen
Tel: +49 7353 2243
Fax: +49 7353 3096
E-Mail:
www.LTB-Lindner.com

Frank Whiteley

[[email protected]]

On Apr 28, 8:08�pm, Marc Ramsey > wrote:
> Now that Grob no longer has a presence in the US, what are the options
> for obtaining parts? �In particular, I'm looking for replacement wing
> tip skids for a Grob 103C (Twin III)...
>
> Thanks,
> Marc

Marc,

Grob Aerospace is in the process of selecting a facility in the USA to
be a parts supplier and service center for the gliders and airplanes.
This will not include the jet.

The process is slow but I think it will be completed. This will not be
a Grob funded operation as the Bluffton, Ohio facility was.

Robert Mudd
Moriarty, New Mexico

[[email protected]]

Marc,

There's also a grob discussion group that should have some info

http://groups.yahoo.com/group/grob_sailplanes/

Larry

[[email protected]]

On Apr 28, 10:06*pm, wrote:
> Marc,
>
> There's also a grob discussion group that should have some info
>
> http://groups.yahoo.com/group/grob_sailplanes/
>
> Larry

Not very lively. 40-ish posts in a year. BTW the membership has
grown by a THIRD since you posted the link!

[toad]

No, we don't talk much on that list.

BTW, when I had the Spar Pin service bulletin done this winter. XU
aviation in Canada was able to order parts directly from Grob in
Germany.

Todd