Tin Bending 101.0

[[email protected]]

..
I'm sitting here, counting my pills with one eye on the clock and I
get this message from a guy who is having some trouble with a piece of
aluminum. Flat piece. 60 inches wide, 180 inches long, .032 inches
thick. So I tell him what to do and he comes back saying he tried
that an it didn't work. Which sorta blows my dander up. Of course it
works! Always has and it always will.

Try it with a piece of paper, I tellz him.

Nope, paper ain't aluminum -- he's not going to let me trick him like
that.

So I tell him to go get a beer can. No, an EMPTY beer can. (He tells
me to wait a minute... glug, glug, glug...)

Okay, not cut off the top & bottom of the beer can. (I can do that,
he sez and asks if I don't need some more empty cans, cuz he's willing
to help. Shushes his wife up; he has been ORDERED to empty them cans.

Empty beer can. No top. No bottom. Use scissors to get it kinda
square. Comes out 3-3/4" wide, 8-1/8" long and .003 inches thick.

NOW we're getting somewheres! (Empties another can for me.)

--------------------------------------------------------------------------------------------------------------------------

You laughing yet? Well don't, cuz there's lots of things you can do
with a whiff of sheef aluminum thinner than a sheet of paper.

Get out your jitterbug and sand on it a while then dip it into you
etchant tank... the thing you store your etchant in when you ain't
using it. (They don't make 12' long trays so you gotta put your
thinking cap on, which usually comes with a couple of sheets of 5mil
plastic attached. Couple of 2x4's. Cover them with plastic sheeting,
pour in your etchant. Now you got a tank twelve feet long, six inches
wide and 1-1/2 inches deep.

What's the etchant? Phosphoric Acid. Same stuff you find in your Coca
Cola and Pepsi Cola and what all. This particular stuff happens to be
Jasco (brand name) 'Prep & Prime.' Bought it at the Borg. Look in
the Paint Department.

Put your beer can stock into the etchant. Slosh it up & down. Rinse
under hot water (no fingerprints, please). Now the aluminum surface
has some 'tooth,' meaning it will hold paint. Or epoxy. Or JB Weld.

Whatcha use it for? To protect the wood. Glue it right to it. No,
not like that! Bend it first. Make is soz it's a perfect fit. NOW
glue it to it. Heel rests? Yeah, it'll work... for a while. But
it's better suited for protecting the edges of ply, like that empty
hole where you usta have a radio before you flew in here and tossed
the keys to a guy you thot was the line-boy. (Naw, don't worry about
it. See them tats? He's an El Tigre and they don't pull much water
around here; this is mostly Azteca territory, unless the Oso Negros is
outta jail. (That's a black bear for those of you who don't speak
Texmex.) ) We'll get your radio back... eventually. But I don't
know about your keys.

Layer of aluminum three thousandths of an inch thick. It offers more
protection than you'd think, assuming it's properly applied.

Christmas is coming. Last year it was a fleet of Chinese junks. This
year it's... something else.

-R.S.Hoover

[Copperhead]

On Dec 8, 1:35*am, " > wrote:
> .
> I'm sitting here, counting my pills with one eye on the clock and I
> get this message from a guy who is having some trouble with a piece of
> aluminum. *Flat piece. *60 inches wide, 180 inches long, .032 inches
> thick. *So I tell him what to do and he comes back saying he tried
> that an it didn't work. *Which sorta blows my dander up. *Of course it
> works! *Always has and it always will.
>
> Try it with a piece of paper, I tellz him.
>
> Nope, paper ain't aluminum -- he's not going to let me trick him like
> that.
>
> So I tell him to go get a beer can. *No, an EMPTY beer can. *(He tells
> me to wait a minute... glug, glug, glug...)
>
> Okay, not cut off the top & bottom of the beer can. *(I can do that,
> he sez and asks if I don't need some more empty cans, cuz he's willing
> to help. *Shushes his wife up; he has been ORDERED to empty them cans.
>
> Empty beer can. *No top. *No bottom. *Use scissors to get it kinda
> square. *Comes out 3-3/4" wide, 8-1/8" long and .003 inches thick.
>
> NOW we're getting somewheres! *(Empties another can for me.)
>
> ---------------------------------------------------------------------------*-----------------------------------------------
>
> You laughing yet? *Well don't, cuz there's lots of things you can do
> with a whiff of sheef aluminum thinner than a sheet of paper.
>
> Get out your jitterbug and sand on it a while then dip it into you
> etchant tank... the thing you store your etchant in when you ain't
> using it. *(They don't make 12' long trays so you gotta put your
> thinking cap on, which usually comes with a couple of sheets of 5mil
> plastic attached. *Couple of 2x4's. *Cover them with plastic sheeting,
> pour in your etchant. *Now you got a tank twelve feet long, six inches
> wide and 1-1/2 inches deep.
>
> What's the etchant? Phosphoric Acid. *Same stuff you find in your Coca
> Cola and Pepsi Cola and what all. This particular stuff happens to be
> Jasco (brand name) 'Prep & Prime.' *Bought it at the Borg. *Look in
> the Paint Department.
>
> Put your beer can stock into the etchant. *Slosh it up & down. *Rinse
> under hot water (no fingerprints, please). *Now the aluminum surface
> has some 'tooth,' meaning it will hold paint. *Or epoxy. *Or JB Weld.
>
> Whatcha use it for? *To protect the wood. *Glue it right to it. *No,
> not like that! *Bend it first. *Make is soz it's a perfect fit. *NOW
> glue it to it. *Heel rests? *Yeah, it'll work... for a while. *But
> it's better suited for protecting the edges of ply, like that empty
> hole where you usta have a radio before you flew in here and tossed
> the keys to a guy you thot was the line-boy. *(Naw, don't worry about
> it. *See them tats? He's an El Tigre and they don't pull much water
> around here; this is mostly Azteca territory, unless the Oso Negros is
> outta jail. *(That's a black bear for those of you who don't speak
> Texmex.) *) *We'll get your radio back... eventually. *But I don't
> know about your keys.
>
> Layer of aluminum three thousandths of an inch thick. *It offers more
> protection than you'd think, assuming it's properly applied.
>
> Christmas is coming. *Last year it was a fleet of Chinese junks. *This
> year it's... something else.
>
> -R.S.Hoover

Bob,

I know that you had a CD of your stories sometime back but how about
having some of them placed in a book and published? I've said it to
you before and I'll say it again, no one writes pratical common sense
stories or articles better than you.

Joe

[[email protected]]

On Dec 8, 7:52*am, Copperhead > wrote:
,
>
> I know that you had a CD of your stories sometime back but how about
> having some of them placed in a book and published?
>-----------------------------------------------------------------------------------------

Dear Joe,

The market is too small.

If presented to the existing market, the price would be too high.

Catch - 22 :-)

-Bob

[Tech Support]

Long time no hear "Oso Negro" and I'm in Texas now.

Used to fly down to the border and bring back as many gallons of "Oso
Negro" as they would allow. Loaded in bird and flew home.

Would pour one shot glass out and fill it with dry vermouth and pour
into the gallon and shake up.

Then put the gallon in deep freezer for several days.

Could come home from work and pour a 'straight up glass" full and sip
before dinner. Was so cold no taste going down and when got to
stomach it had warmed up enogh that there was this small "eruption"
:o)

All a long time ago in a land far away :o)

Big John

************************************************** ************************
Dec 2008 23:35:49 -0800 (PST), " >
wrote:

>.
>I'm sitting here, counting my pills with one eye on the clock and I
>get this message from a guy who is having some trouble with a piece of
>aluminum. Flat piece. 60 inches wide, 180 inches long, .032 inches
>thick. So I tell him what to do and he comes back saying he tried
>that an it didn't work. Which sorta blows my dander up. Of course it
>works! Always has and it always will.
>Try it with a piece of paper, I tellz him.
>
>Nope, paper ain't aluminum -- he's not going to let me trick him like
>that.
>
>So I tell him to go get a beer can. No, an EMPTY beer can. (He tells
>me to wait a minute... glug, glug, glug...)
>
>Okay, not cut off the top & bottom of the beer can. (I can do that,
>he sez and asks if I don't need some more empty cans, cuz he's willing
>to help. Shushes his wife up; he has been ORDERED to empty them cans.
>
>Empty beer can. No top. No bottom. Use scissors to get it kinda
>square. Comes out 3-3/4" wide, 8-1/8" long and .003 inches thick.
>
>NOW we're getting somewheres! (Empties another can for me.)
>
>--------------------------------------------------------------------------------------------------------------------------
>
>You laughing yet? Well don't, cuz there's lots of things you can do
>with a whiff of sheef aluminum thinner than a sheet of paper.
>
>Get out your jitterbug and sand on it a while then dip it into you
>etchant tank... the thing you store your etchant in when you ain't
>using it. (They don't make 12' long trays so you gotta put your
>thinking cap on, which usually comes with a couple of sheets of 5mil
>plastic attached. Couple of 2x4's. Cover them with plastic sheeting,
>pour in your etchant. Now you got a tank twelve feet long, six inches
>wide and 1-1/2 inches deep.
>
>What's the etchant? Phosphoric Acid. Same stuff you find in your Coca
>Cola and Pepsi Cola and what all. This particular stuff happens to be
>Jasco (brand name) 'Prep & Prime.' Bought it at the Borg. Look in
>the Paint Department.
>
>Put your beer can stock into the etchant. Slosh it up & down. Rinse
>under hot water (no fingerprints, please). Now the aluminum surface
>has some 'tooth,' meaning it will hold paint. Or epoxy. Or JB Weld.
>
>Whatcha use it for? To protect the wood. Glue it right to it. No,
>not like that! Bend it first. Make is soz it's a perfect fit. NOW
>glue it to it. Heel rests? Yeah, it'll work... for a while. But
>it's better suited for protecting the edges of ply, like that empty
>hole where you usta have a radio before you flew in here and tossed
>the keys to a guy you thot was the line-boy. (Naw, don't worry about
>it. See them tats? He's an El Tigre and they don't pull much water
>around here; this is mostly Azteca territory, unless the Oso Negros is
>outta jail. (That's a black bear for those of you who don't speak
>Texmex.) ) We'll get your radio back... eventually. But I don't
>know about your keys.
>
>Layer of aluminum three thousandths of an inch thick. It offers more
>protection than you'd think, assuming it's properly applied.
>
>Christmas is coming. Last year it was a fleet of Chinese junks. This
>year it's... something else.
>
>-R.S.Hoover

[[email protected]]

On Dec 8, 5:26*pm, Tech Support <> wrote:
> Long time no hear "Oso Negro" and I'm in Texas now.
>-------------------

Then I guess I better not mention Cuervo :-)

[Ernest Christley]

wrote:
> .
> I'm sitting here, counting my pills with one eye on the clock and I
> get this message from a guy who is having some trouble with a piece of
> aluminum. Flat piece. 60 inches wide, 180 inches long, .032 inches
> thick. So I tell him what to do and he comes back saying he tried
> that an it didn't work. Which sorta blows my dander up. Of course it
> works! Always has and it always will.
>
> Try it with a piece of paper, I tellz him.
>
> Nope, paper ain't aluminum -- he's not going to let me trick him like
> that.
>
> So I tell him to go get a beer can. No, an EMPTY beer can. (He tells
> me to wait a minute... glug, glug, glug...)
>
> Okay, not cut off the top & bottom of the beer can. (I can do that,
> he sez and asks if I don't need some more empty cans, cuz he's willing
> to help. Shushes his wife up; he has been ORDERED to empty them cans.
>
> Empty beer can. No top. No bottom. Use scissors to get it kinda
> square. Comes out 3-3/4" wide, 8-1/8" long and .003 inches thick.
>
> NOW we're getting somewheres! (Empties another can for me.)
>

Thanks for the Jasco tip. And I have several places where the aluminum
can trick will come in handy. But what was the guy doing with the .035
that he didn't think he could do.

<the rest snipped because aioe.org made me. It apparently has a limit
on quoted lines>

[Gerry Caron[_2_]]

> wrote in message
...
On Dec 8, 7:52 am, Copperhead > wrote:
,
>
> I know that you had a CD of your stories sometime back but how about
> having some of them placed in a book and published?
>-----------------------------------------------------------------------------------------

Dear Joe,

The market is too small.

If presented to the existing market, the price would be too high.

Catch - 22 :-)

Have you tried Cafe Press? www.cafepress.com Anyone can be published.

Gerry

[Andy Asberry[_2_]]

On Mon, 8 Dec 2008 21:27:00 -0500, "Gerry Caron" >
wrote:

>
> wrote in message
...
>On Dec 8, 7:52 am, Copperhead > wrote:
>,
>>
>> I know that you had a CD of your stories sometime back but how about
>> having some of them placed in a book and published?
>>-----------------------------------------------------------------------------------------
>
>Dear Joe,
>
>The market is too small.
>
>If presented to the existing market, the price would be too high.
>
>Catch - 22 :-)
>
>Have you tried Cafe Press? www.cafepress.com Anyone can be published.
>
>Gerry
>
>
>
Or http://publishamerica.com/