Propeller question

[John Nicholson]

I'm building a Lancair 360 with the Mattituck IOF-360 engine. Any
suggestions on a good constant speed propeller to go with this setup?

[RobertR237]

In article >, "John
Nicholson" > writes:

>
>I'm building a Lancair 360 with the Mattituck IOF-360 engine. Any
>suggestions on a good constant speed propeller to go with this setup?
>
>

If money is not a big issue, I would go with the MT prop using either the
electric or standard govenor.


Bob Reed
www.kisbuild.r-a-reed-assoc.com (KIS Builders Site)
KIS Cruiser in progress...Slow but steady progress....

"Ladies and Gentlemen, take my advice,
pull down your pants and Slide on the Ice!"
(M.A.S.H. Sidney Freedman)