Jantar Standard Canopy

[jmarc]

Is that possible to buy somewhere only the plastic
part of the Jantar canopy? I should probably take a look at
the "ceebaileys" like the previous post said for the Blanik.

But I think it will not be available that way. So I post here to know
if anybody have very good condition Jantar canopy used, to sell..?

jmarc...

[Henryk Birecki]

I do not have information, but you may want to specify which Jantar
Std. 3 has different type of canopy than 2 and I am not sure if one
from 1 fits 2.

Henryk Birecki


"jmarc" > wrote:

>Is that possible to buy somewhere only the plastic
>part of the Jantar canopy? I should probably take a look at
>the "ceebaileys" like the previous post said for the Blanik.
>
>But I think it will not be available that way. So I post here to know
>if anybody have very good condition Jantar canopy used, to sell..?
>
>jmarc...

[jmarc]

Good point! It is a Jantar Std 2 ...

jmarc..

"Henryk Birecki" > wrote in message
...
>I do not have information, but you may want to specify which Jantar
> Std. 3 has different type of canopy than 2 and I am not sure if one
> from 1 fits 2.
>
> Henryk Birecki
>
>
> "jmarc" > wrote:
>
>>Is that possible to buy somewhere only the plastic
>>part of the Jantar canopy? I should probably take a look at
>>the "ceebaileys" like the previous post said for the Blanik.
>>
>>But I think it will not be available that way. So I post here to know
>>if anybody have very good condition Jantar canopy used, to sell..?
>>
>>jmarc...
>

[sisu1a]

> >>But I think it will not be available that way. *So I post here to
know
> >>if anybody have very good condition Jantar canopy used, to sell..?

Since it's a Std 2, now you should specify whether you need the front,
rear, or both sections since it's a 2 piece'r... There is a canopy
part that may be able to be fit for the rear section on wings & wheels
if you scroll down the page some...

http://www.wingsandwheels.com/Used%20Parts.htm

I know where a good canopy mounted to a frame for a Std 3 is should
you want to upgrade to a single piece canopy (there's already a few
2's out there with this conversion), although that's a 337 surgery as
opposed to mere maintenance... it sure is a nice view though!

-Paul

[jmarc]

You are right again. We need only the rear part.
I took a look at the wings & wheels site. But not sure
if I saw the one you talked about! Is seems to be
a one piece full canopy without the little door.. So
I will get more informations from the dealer..

But the best way is to find out

So, lurking on the newgroup, I learn about the MecaPlex
company. They seems to be the best place to get a
replacement canopy. Maybe they built original parts for
glider constructors, too! But it might be a bit pricy.

The best might be

So if nobody here on the net have good condition used
canopy, I probably contact them to know how much it
will cost for the plastic part (hoping the door will be





"sisu1a" > wrote in message
...
> >>But I think it will not be available that way. So I post here to
know
> >>if anybody have very good condition Jantar canopy used, to sell..?

Since it's a Std 2, now you should specify whether you need the front,
rear, or both sections since it's a 2 piece'r... There is a canopy
part that may be able to be fit for the rear section on wings & wheels
if you scroll down the page some...

http://www.wingsandwheels.com/Used%20Parts.htm

I know where a good canopy mounted to a frame for a Std 3 is should
you want to upgrade to a single piece canopy (there's already a few
2's out there with this conversion), although that's a 337 surgery as
opposed to mere maintenance... it sure is a nice view though!

-Paul

[jmarc]

You are right again. We need only the rear part!

I took a look at the wings & wheels site. But not sure
if I saw the one you talked about! Is seems to be
a one piece full canopy without the little door.. So
I will get more informations from the dealer..

Our Jantar is a SZD48-1 Standard 2
Once again, the best way is to find out there a used canopy
in pretty good condition..

So, lurking on the newgroup, I learn about the MecaPlex
company. They seems to be the best place to get a
replacement canopy. Maybe they built original parts for
glider constructors, too! But it might be a bit pricy.

jmarc..

"sisu1a" > wrote in message
...
> >>But I think it will not be available that way. So I post here to
know
> >>if anybody have very good condition Jantar canopy used, to sell..?

Since it's a Std 2, now you should specify whether you need the front,
rear, or both sections since it's a 2 piece'r... There is a canopy
part that may be able to be fit for the rear section on wings & wheels
if you scroll down the page some...

http://www.wingsandwheels.com/Used%20Parts.htm

I know where a good canopy mounted to a frame for a Std 3 is should
you want to upgrade to a single piece canopy (there's already a few
2's out there with this conversion), although that's a 337 surgery as
opposed to mere maintenance... it sure is a nice view though!

-Paul

[Adam]

On Jun 26, 3:14*pm, "jmarc" > wrote:
> You are right again. *We need only the rear part!
>
> I took a look at the wings & wheels site. *But not sure
> if I saw the one you talked about! *Is seems to be
> a one piece full canopy without the little door.. *So
> I will get more informations from the dealer..
>
> Our Jantar is a SZD48-1 Standard 2
> Once again, the best way is to find out there a used canopy
> in pretty good condition..
>
> So, lurking on the newgroup, I learn about the MecaPlex
> company. *They seems to be the best place to get a
> replacement canopy. *Maybe they built original parts for
> glider constructors, too! *But it might be a bit pricy.
>
> jmarc..
>
> "sisu1a" > wrote in message
>
> ...
>
> > >>But I think it will not be available that way. So I post here to
> know
> > >>if anybody have very good condition Jantar canopy used, to sell..?
>
> Since it's a Std 2, now you should specify whether you need the front,
> rear, or both sections since it's a 2 piece'r... *There is a canopy
> part that may be able to be fit for the rear section on wings & wheels
> if you scroll down the page some...
>
> http://www.wingsandwheels.com/Used%20Parts.htm
>
> I know where a good canopy mounted to a frame for a Std 3 is should
> you want to upgrade to a single piece canopy (there's already a few
> 2's out there with this conversion), although that's a 337 surgery as
> opposed to mere maintenance... *it sure is a nice view though!
>
> -Paul


Perhaps try joining and posting to the Jantar group on Yahoo.

http://groups.yahoo.com/group/jantar-sailplanes/

/Adam

[Adam]

On Jun 26, 3:14*pm, "jmarc" > wrote:
> You are right again. *We need only the rear part!
>
> I took a look at the wings & wheels site. *But not sure
> if I saw the one you talked about! *Is seems to be
> a one piece full canopy without the little door.. *So
> I will get more informations from the dealer..
>
> Our Jantar is a SZD48-1 Standard 2
> Once again, the best way is to find out there a used canopy
> in pretty good condition..
>
> So, lurking on the newgroup, I learn about the MecaPlex
> company. *They seems to be the best place to get a
> replacement canopy. *Maybe they built original parts for
> glider constructors, too! *But it might be a bit pricy.
>
> jmarc..
>
> "sisu1a" > wrote in message
>
> ...
>
> > >>But I think it will not be available that way. So I post here to
> know
> > >>if anybody have very good condition Jantar canopy used, to sell..?
>
> Since it's a Std 2, now you should specify whether you need the front,
> rear, or both sections since it's a 2 piece'r... *There is a canopy
> part that may be able to be fit for the rear section on wings & wheels
> if you scroll down the page some...
>
> http://www.wingsandwheels.com/Used%20Parts.htm
>
> I know where a good canopy mounted to a frame for a Std 3 is should
> you want to upgrade to a single piece canopy (there's already a few
> 2's out there with this conversion), although that's a 337 surgery as
> opposed to mere maintenance... *it sure is a nice view though!
>
> -Paul

FWIW, the seller of that canopy recently owned a Jantar Std 2.

//Adam

[sisu1a]

On Jun 25, 7:11*am, "jmarc" > wrote:
> Is that possible to buy somewhere only the plastic
> part of the Jantar canopy? *I should probably take a look at
> the "ceebaileys" like the previous post said for the Blanik.
>
> But I think it will not be available that way. *So I post here to know
> if anybody have very good condition Jantar canopy used, to sell..?
>
> jmarc...

if your still looking...
http://adverts.gliderpilot.net/?op=s3&id=338

-Paul

[[email protected]]

Are you always looking for a canopy for your jantar ?
I have one for sale for 1000CAD
Link of the advice: http://wingsandwheels.com/class/classified.php?id=2398
Pleasure