Mosquito Parts

[mike cramb]

I have acquired some mosquito A parts and as I am using some of these on my B, I will have some B parts available as well.

* A elevators.
*A/B canopy with frame small crack at window.
*A tailplane some damage easy repair all intact.
*A flaps one side perfect the other minor damage.
*A rudder minor damage to skin.
* A rudder pedals.
*B ailerons.
* A/B canopy hinge and supports.
* A tailwheel and section of fuse surround it.

All the A parts were refinished in polyurethene only 2 flights before it was wrecked. I am using the carbon fibre ailerons on my B unless there is some unforeseen problem that wont allow this. email me for more details




Cheers
MIKE

[Spam]

Hi Mike,

can you list your email again? It didn't come through...try replacing
the @ symbol with at next time.

Could your canopy hinge be mounted onto an ASW-15 canopy? My canopy
doesn't have a hinge. I wonder if I could retrofit mine to have a
hinge.

SA

[Brad[_2_]]

On Jun 26, 6:19*pm, Spam > wrote:
> Hi Mike,
>
> can you list your email again? *It didn't come through...try replacing
> the @ symbol with at next time.
>
> Could your canopy hinge be mounted onto an ASW-15 canopy? *My canopy
> doesn't have a hinge. *I wonder if I could retrofit mine to have a
> hinge.
>
> SA

I designed, built and installed the forward canopy hinge installation
for my HP-24, I could send you pix of that if you want some ideas for
your ASW-15. The Apis I built also required me to fab and install some
of the components for the canopy hinge as well.

Both are fairly simple and might inspire you!

Brad

[mike cramb]

Hi Mike,

can you list your email again? It didn't come through...try replacing
the @ symbol with at next time.

Could your canopy hinge be mounted onto an ASW-15 canopy? My canopy
doesn't have a hinge. I wonder if I could retrofit mine to have a
hinge.

SA


Hi SA,

You could probably fit it but you are better off building your own. I would have a close look at a Mossie then copy the idea to the measurements required. Even better have a look at a HPH shark mechamism you could probably buy one direct from the factory new. They have a gas strut and dont require the side supports. The big problem will be making sure you can still jetison your canopy and jump out if required. Realy I would prefer to sell these parts to a Mossie owner to help keep one flying. Buy the way I am in West Australia. email mccrambatbigpond.com

Mike

[Peter Scarpelli]

Mike,
I have a friend looking for a right aileron for his mosquito.
Could you email me directly.
thanks,

Peter

"mike cramb" > wrote in message
...
>
> I have acquired some mosquito A parts and as I am using some of these on
> my B, I will have some B parts available as well.
>
> * A elevators.
> *A/B canopy with frame small crack at window.
> *A tailplane some damage easy repair all intact.
> *A flaps one side perfect the other minor damage.
> *A rudder minor damage to skin.
> * A rudder pedals.
> *B ailerons.
> * A/B canopy hinge and supports.
> * A tailwheel and section of fuse surround it.
>
> All the A parts were refinished in polyurethene only 2 flights before
> it was wrecked. I am using the carbon fibre ailerons on my B unless
> there is some unforeseen problem that wont allow this. email me for
> more details
>
>
>
>
> Cheers
> MIKE
>
>
>
>
> --
> mike cramb

[mike cramb]

Mike,
I have a friend looking for a right aileron for his mosquito.
Could you email me directly.
thanks,

Peter

"mike cramb" wrote in message
...

I have acquired some mosquito A parts and as I am using some of these on
my B, I will have some B parts available as well.

* A elevators.
*A/B canopy with frame small crack at window.
*A tailplane some damage easy repair all intact.
*A flaps one side perfect the other minor damage.
*A rudder minor damage to skin.
* A rudder pedals.
*B ailerons.
* A/B canopy hinge and supports.
* A tailwheel and section of fuse surround it.

All the A parts were refinished in polyurethene only 2 flights before
it was wrecked. I am using the carbon fibre ailerons on my B unless
there is some unforeseen problem that wont allow this. email me for
more details




Cheers
MIKE




--
mike cramb

Guys is there any one else out there with a broken Mosquito and wants to sell some parts, also any parts for a Phoebus. If you know of any or some one who has some bits give em a shove and tell them to get in contact with me or dob them in and give me there email.LOL

Mike