Looking for a US dealer or someone who may have a Microair 760 radio for sale for a reasonable (to me) price. Thanks

Any available in or near Ohio? Nick

When you guys weld up your 4130 airframes do you use any type of rust inhibitor in the tubes? I have read about some that you spray in the tubes ait crawls up the walls to coat the whole inside, and it is supppose to leak out of any weldment that had a pinhole in it. I am just curious if you...

Hello again: Thank you. I got a lot of info on the UV degradation of windsocks. Have any of you had more success with one brand/material than another? I live in the NW hills of Connecticut which are at the base of the Berkshire Mountains and the elevation is 1020'. I spoke to the airport manager of...

"Michael Horowitz" wrote in message ... I want to wipe down a wing prior to applying a coating of dope. Is there an acceptable substitute for MEK? - Mike I've used Prep-sol from Dupont for that. It's good for getting rid...

On a recent shipment AS&S charged $55 for a shipment that should have cost approx $31-35 according to UPS. AS&S can't explain the charges nor admit they are wrong. I suppose they feel UPS is mistaken. Anyone else experience this deception? Kenny Danielson, Coeur d'Alene, Idaho

Hi, my name is Lars. Over the past years online, I’ve learned something about e-commerce: You may have the best offer, without visitors nobody will ever know and it simply will not work for you. That’s why Stephan Ducharme’s course is THE only way to make it online if you are a regular person...

could someone please provide me with a copy of the standard release of liability when selling a homebuilt,I contacted EAA to no avail.or point me in the right direction to obtain one. Thanks Ray

I was just wondering what homebuilders are have installed or are planning to install into their aircraft to provide Nav/Comm capability? Handheld or panel-mounted? If panel-mounted, then: older, TSO-certified radios? new, but used, radios? brand new radios (a KX-155 with glide slope lists for...

For several days we have enjoyed having a delightful couple (flying a beautiful -- and gigantic -- old Luscombe, all the way from the D.C. area!) stay with us who are on their way to the antique aircraft fly-in, held at Blakesburg, IA each year. Despite our owning poor old (but not old...

Folks - Looking for something to use to spray small quantities of rejuvenator and dope away from electricity, I came upon a rechargale aerosol spray can sold by JCWhitney and Wag-Aero. Anyone had any experience with this tool? - Mike

http://www.cencal.com/oscar.html Also http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2430202118

I have a set of plans I bought after it was in Kitplanes. I'll look them up. I was planning to build one, but instead Jr. Ace, and now in the middle of building 6 Piets. Give me a couple of days Barry "Canuck Bob" wrote in...

I may not be a high time pilot but there aren't many people about whom three training captains at American Eagle have said flies better than 90% of captains they train on the ERJ and Saab. And I had three JAL training captains tell me I could fly a 747 better than moooozer. Walt

I need to make a dozen 37 degree flares in 1/8 stanless line for a brake system. My flaring tool only goes to 3/16. Spruce has the "Rolo-flare" tool that goes to 1/8" for $80 or so, but they say it's not for use with stainless. OTOH, the other vendors that carry the Rolo-flare don't say anything...

I have a 12v DC linear actuator, it just has 2 wires coming from the motor. If I connect the red wire to the positive terminal of the battery and the black to the negative, the motor extends. When I reverse the wires the motor retracts. The motor draws about 5 amps. Pretty straight forward...

I have a device (of my own design) hooked into my pitot-static system using barbed tee's, breeze clamps and Tygon tubing. The problem is it is too hard to remove. (And I have to remove it often since my device is still under development). What kind of fitting could I put into the line to make it...

Does anyone here know where I can buy a plastic fender for a front wheel. It's 4.00x4.80 on a 8" azusa wheel and I have 6" between the fork tubes. Thanks! -- Have a good one! Steve www.americanspiritppc.com

"Bertie the Bunyip" wrote in message ... "Tarver Engineering" wrote in : "Ed Majden" wrote in message ... ...

Anybody ever think about putting a SOLAR turbine on the front of a Pulsar? Ric Stitt tells me his planetary transmission will drive a prop at 3000 rpm as a constant rpm output from the SOLAR. At about 150 hp and using the prop at constant rpm with varying pitch, that baby ought to go Vne in level...