My flying club is in the market for a couple of newer (probably less than ~2000 hrs TT), basic four seat used aircraft. I'm trying to find additional resources for used aircraft listings. Trade-a-Plane doesn't appear to cut it by itself anymore for used aircraft listings. Can anyone suggest any...

(Unabashed promotion) Four Channel Cockpit Lighting controller. Works on 12 or 28 volts systems and supports LEDs. http://www.fdatasystems.com/LC_40.htm

Any thoughts on the best site out there other than the usual suspects ADD, NOAA ? What sites and why -- would prefer quick graphics on one page Java based. Any input would be greatly appreciated. Bob

According to AvWeb, Cessna says they are going to have a hard time producing their LSA for under $100,000. That's not going to sell well. Then again, I may be wrong!

Hy, Just to inform you, a very nice French historical aircraft to sell at : http://www.planecheck.com?ent=da&id=8986

While in Johannesburg on a business trip I had free time over the weekend so I found a local GA operator and went flying. I flew with http://www.skyafrica.com out of Brakpan-Benoni airfield (in the shadow of Joburg International) If you're ever in this part of the world, I highly recommend it. I...

I thought you folks might get a kick out of the reaction of the fellow who will be staying with us during EAA. Here's some of what he's written (with his permission): ************************************************************ HOLY COW!!!!!! i don't believe it. i've been dreaming about going...

I'm currently working on a design of a new controlled domestic aerodrome. The runway is supposed to comply with ICAO code 3C specs. Aircraft like Fokker F27 Series, Fokker F28, BAe.146 Series, Dash 8 and Dornier 288s could be operated. The primary purpose of the airport is for domestic passenger...

Hi all. The glass (plastic?) faces of my VSI and altimeter are getting a bit clouded. Is it possible to get these replaced with new--as in "clear"--faces? Can anyone point me in the right direction? Thanks, Marco

Hey Cherokee owners, Has anyone run into a problem with the whole dash and all avionics heating up??? Since I bought the plane this past summer, I thought all the heat build up was due to our famous San Antonio summer weather. But I flew into a cold front last night and the temp went down below...

Are TSO Instruments required in certificated aircraft? Altimeter, airspeed , anything..... If yes, where is this specified? I've looked in the FARs and haven't been able to find this yet. Any help would be appreciated.

I have access to three unadvertised GIV-SP's for sale; a 1993, a 1996 and a 2001 with only 700 hours! *** Sent via http://www.automationtools.com *** Add a newsgroup interface to your website today.

Passing on an offer/opportunity from Lifeline Pilots. Jim Good Afternoon, Pilots

I ran across this interesting web site about an alternative way to fly. Looks like fun. Ronnie http://www.clusterballoon.org/

I have an AvMap GPS and looking for a RAM Mount fastened to the seat rails. My plane is a 1973 Cessna 172M. Any idea who may the best price. Hank

Hello! I've got an expensive opportunity on the go. My electrical generation system failed in the Pitts a couple of weeks ago. Had to get jump started at Le Touquet to come back across the Channel, then again at Lydd to get home. Not fun, I can tell you, but folks were immensely helpful at...

We are working on a 64 M20C Mark21, it does not have the "forward windshield speed mod", still the factory design. There are two panels in front of the windshield on the outside that cover the avionics assembly inside. They have been sealed with silicone so many times that it took us 4 hours...

I bought a PA-24-260 with a verrry slow leak from the prop governor. This has taught me some things about oil leaks. 1) Oil does not go in the obvious direction. Even after you take into account the general airflow around the engine compartment and baffling there are local variations that make...

http://users.skynet.be/fa926657/files/B29.wmv Dave

I'd like to get some paint work done on my plane, and I was wondering if anyone has recommended paint shops in the Ohio, Michigan, Indiana area. The plane is a warbird that is mostly bare aluminum. I want to get the insignia, stripes, and wheelwells re-done. Any recommendations would be...