Simply put, how do you go about practicing for cross country flights, radio comm, etc from the comfort of your own home?

test

None of them. The alloy used in the VW crankcase has proven to be susceptible to age- hardening and the cracks which follow. It took about thirty years (!) for that fact to become evident but tests went back and confirmed that the crankcase, which is a magnesium-aluminum alloy, became...

http://www.zasucks.com/

Hello again, These examples are what I wanted when I posted to this group. I want a sense of accomplishment. An awakening of adventure. A safe and affordable aircraft to build. That is why I went with Vans. There are three of us that work on aircraft all day in our work lives. Inside the three of...

Anyone know why a painted Epic fuselage, seemingly with engine installed, would be on a flatbed trailer traveling North on I-285 near Atlanta? My guess is that this fuselage was a display unit or mock-up, because the fuselage appeared complete and finished, minus the horizontal stab and wings...

http://www.theblackhole.us/

want to buy vision 2 place plans does anyone have a set and they are not planning to build this plane i would be interested in buying them. tommylaudato AT hotmail.com remove AT

RAH=malicious gossip; howsomever, I got some good news for you. You can save about 25-30% on new parts for acft engines by shopping around. Use guggle. I won't tell you how to do it but you can. I did and it works but if I tell you and everybody else and his brother how, the company I...

How is Janice mending? Stealth Pilot

My four tailwheel unit auctions on ebay have not even reached half of the new prices of tailwheels. It seems that you can get a great deal and save hundreds off the new replacement cost. If you can machine the bronze oilite bushings on a home lathe, you can restore three Maule tailwheels, sell two,...

I am in the need of a back distributor block for a MA-4, plug wires come out the back instead of the top, any help will be greatly appreicated. Joe Spencer

Does anyone know of any guidelines regarding the minimum safe distance between oxygen equipment (tanks, high pressure lines, low pressure lines) and fuel system equipment (tanks, lines, valves)? Thanks!

Do you own and fly an experimental or mogas-stc aircraft based at a field that does not have mogas? If you would like to help other experimental/mogas-stc pilots obtain mogas when they travel, and see some interesting planes when they pass through your area, add yourself to the...

Take a look at this sites http://anime-yuri.hentai4you.info/anime-girls-yuri-hentai.html anime girls yuri hentai http://anime-yuri.hentai4you.info/yuri-anime.html yuri anime http://anime-yuri.hentai4you.info/hentai-yuri-anime.html hentai yuri anime ...

Measuring the torque of an engine is a trivial chore when the load is a propeller. So long as the engine is allowed to rotate around the axis of its crankshaft, the amount of torque it produces can be measured using nothing more complicated than a bucket of water. (Hint: 'A pint's a pound the...

I'm practicing with an Ox/Ac rig; Using mild steel (.035). Got a little cocky and decided to try a patch on tubing. With a rosette weld as well as along the edges. Well, I chased that hole all over the patch! burning it and filling and burning and filling! The patch obviously getting hotter than...

Free AdGuru Audio ebook giveaway at http://www.freeadguru.com/cgi-bin/i.pl?c=a&i=30082. check it out! http://emarketingsecret.blogspot.com --- MAF Anti-Spam ID: 20050912040711F9f9OcD1

I need to make some switches. Any suggestion as to where to buy shafts? I used to have a link to a place that sold the shafts and accessories. I lost said link. Dan, U.S. Air Force, retired