"Bigdaddie" wrote in message ... What parts would you need to make an LED position light system? I think new traffic signals are LEDs and they are pretty bright. Tthere is a position light for the tail...

I have for auction on EBay a new Infinity Military Style Control Stick Grip. If you wish to view, here is the link: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&item=2436097988&category=26439 Thanks. Terry

Can someone point me on how to build a fiberglass fuel tank and use aluminum fittings? Thanks Bill

UPDATE - MAY 15-16 RAAC NATIONAL FLY-IN AND AGM AT WIARTON Confirmations are coming in from display planes and manufacturers. Here are the latest additions, with a tentative schedule for the weekend: SATURDAY MAY 15 Don and Beate Kingsley are arranging hikes and garden tours in the area, for...

my previous post about putting my Super Yankee for auction on ebay. DO NOT reply to the "reply" address on this newsgroup, I am no longer receiving mail there. If you wish to e-mail me, you can try auster5 (at) earthlink (dot ) net.

Anyone know how the pins on a TDR-950 transponder connector are numbered? As you are looking at the connector from the back of the unit, left to right? Right to left? Thanks.

Does the marker beacon antenna HAVE to be the length stated in your manual or can it be scaled down? Reason I ask is I don't have the length available in my fuselage without going over large metallic objects. (Like a oxygen tank or rear tiedown mount.) Thanks for your support. -- Bart D....

What is the difference between a flying wing and a tailless airplane? Is there a difference? Just wondering after reading the post about the monarch glider a few weeks ago. Where would an ME-163 be classified. Does an F-106 or B-58 delta wing count as a tailless airplane? Thanks Bernadette

Subject: Instrument Panel Lights - Need Help I am attempting to install panel lights in my previously built Glasair. We are trying to go with the bezel lights on 5 - 3 1/8" instruments, however above three of these instruments are the small Vision Microsystems instruments. The backs on these...

Hi Home-built friends, The Dutch Homebuilt Association NVAV invites you to their Annual Fly-in and Barbeque on Drachten Airfield (EHDR) on 3-4-5 June 2005 EHDR is situated in the North of Netherlands (Friesland) and offers a well maintained 950 mtrs. asphalt runway and excellent camping space. It...

I know this subject has come up often in the past and I have checked back on most the old postings for a cure but still don't seem to be able to solve the problem. The aircraft is a Koala (Fisher Products, all wood and fabric). Radio fitted is a Narco Com 810 with Telex headsets. (I know it's not...

Quick question regarding the copper foil antennas.... I have a Vari-Eze and have successfully used Jim Weir's RST copper foil antennas for years in my canard and winglet. It is time to repaint the aircraft and I was about to decide on PPG DP epoxy primer (white) and an acrylic urethane topcoat...

Photos of damage to J3 Cub propeller after replacement of old engine mount with new factory engine mount. Cowl clips rub against back of propeller, wearing a groove the size of a nickel and a few centimeters deep in the metal prop. Worth checking your installation for similar problem. Note the...

Up for auction on ebay now is an HP-18 project. It has flown 1500 hours but needs a complete rebuild. It NEEDS either wing contouring or use it as a "quickbuild" kit for a Super-18 with the fuselage, tail, wing spars and controls already built. Comes with a very good Gehrlein open heavy duty...

Nathan Young wrote: On Tue, 13 Jan 2004 18:25:43 -0700, MikeM wrote: Nathan Young wrote: I checked this afternoon. It is mounted on the engine side of the

PRESS RELEASE RELEASE DATE: 02 October 03

I have a set of Original Cessna 140 aluminum wheel pants, brackets, and envelope of paper templates with dimensions to make other brackets. Came off my 1946 Cessna 140. I have since sold the plane and no longer need these items. These are to be placed in an ebay auction this Sept 11-16th under...

I've had a kind of unnerving vibration in my RV-4 since first flight. I looked into harmonic dampers, but they're pretty expensive, so I decided to give dynamic balancing a shot first. $200 and 1 hour later, my engine runs *much* smoother. It measured 0.3+ ips on the first run, so the guy weighed...

Enjoy as the story continues with episode VII of the A-10 restoration project. http://www.mitchellwing.com/documents/episode_1.htm -- Have a good day and stay out of the trees! See ya on Sport Aircraft group http://groups.yahoo.com/group/Sport_Aircraft/

OK, guys... I'm making an official announcement. "Airplanes don't kill people!, people kill people!" This statement is hereby mine and none of you better use it without my concent! LOL. Monday I'm going to the T-shirt shop and ordering me 1000 units of various sizes. Let me know if anyone...