"Mike Ciholas" wrote in message
om...
I'm in the throes of a big decision on my next airplane. One airplane
in consideration is an MU-2, probably a short body version from the
early to mid 1970s. I have been able to find detailed information,
gossip, opinions, local pilots, and so forth on my other candidate
types (like a Cessna 421C) but beyond what I read in the Buyer's Guide
books, I have no "feel" for the ownership experience of an MU-2.
I have an '82 Marquise and before this one, I have a '78 "N" model. The
airplanes offer a good combination of price and performance and are
extremely well built. One of the reasons that they have such a good price
performance ratio is the difficulty of getting insurance. This limits the
number of potential buyers. If you are going to insure the hull then you
should inquire about getting coverage as a fist step. The early airplanes
are cheap to buy but more expensive to own. Also there aren't really many
"really nice" early airplanes because it costs the same to replace all the
parts and the early airplane is not worth nearly as much in the end as a
late model airplane so people don't spend the money. I realized this when I
have the N model and decided to upgrade to a Marquise.
In many ways, an MU-2 is my ideal airplane. Long range, fast, but
capable of short and rough fields. I don't put much weight on the
MU-2s reputation as being difficult to fly or dangerous. I'll get the
training I need to be safe in the airplane. I can deal with its
"unique" qualities. The performance is worth it.
The only places that training is availible are TN and FL. Keep in mind that
you will HAVE to go once a year whether you have insurance or not. This may
or may not be a major PITA for you. It is for me since I live in the West
and the only MU-2 simulators are on the East Coast (Orlando).
I don't have a very good feel for the various vintages and options of
each model year, nor for the operating costs. You clearly have to
find a specialized shop for the maintenance and that goes for
training, too. I've never operated or owned a turbine aircraft, but
my experiences so far with turbocharged piston airplanes has not been
great. I get the feeling that buying the "wrong" MU-2 is a major
mistake. I need to understand what it means to do a hot section
inspection, what tricks to keep the airplane in shape, what things to
look out for, etc. I'd rather use someone else's experience than go
broke getting my own. :-)
In contrast to training, maitenance is availible in a number of places
throughout the US. It probably won't be local though. You are right in
saying that buying turbine lemon can be a major mistake. You need to use a
reputable broker and a MU-2 service center for the prebuy. Turbine
airplanes and the systems in them are very reliable. I have never had a
mechanical failure that caused me to cancel a flight. As for choosing a
model, basically each model was a substantial improvement over the previous
one. Usually there were a large number of small improvements between
models, more power, more preasurization, quieter, newer systems and better
avionics. The big items to check are engines, props, windshields and
windows, air cycle machine and boots. If these things are in good condition
you shouldn't have any huge disasters.
So, do we have any MU-2 gurus out there? Anybody willing to provide
guidance? I'd love to visit an owner, see their airplane, and have a
good heart to heart about it so I can fairly judge the cost and
hassles of owning an MU-2. If anyone has good long term actual cost
numbers, I'd be most interested.
In the 1200 hours over 5 1/2 years that I have owned/flown MU-2s I have
spent
$178,000 Fuel
$26,000 Training
$45,000 Insurance Some years I had no insurance, some years I had only
liability and some years I had full coverage. I buy insurance based on
whether I think it is a good deal or not.
$417,000 Maitenance I have included everything spent at a service center as
"maitenance" even though some of it was on improvements such as avionics,
interior or replacing parts that didn't need to be replace right then but
would in the next few years. Over an extended period of time interiors and
avionics need to be replaced so I accounted for it this way.
$48,000 Supplies. These include parts that I purchased and were installed
by others such as tires as well as parts that I installed myself like
batteries.
$42,000 Hanger and tiedown fees. This was before I had my own (owned)
hanger.
$5,000 Tools This includes $3,000 for a powertow.
This comes to $634/hr but not all of it is really nesessary expense. I
suppose that I should deduct $50,000 that I made on the sale of the N model.
$500/hr would be more typical. More if you fly less and less if you fly
more. Many people will tell you much lower figures but these same people
consider it an Act of God when they get a $35,000 bill for overhauling an
air cycle machine. They also consider new avionics to be an "upgrade" but
the fact is that old avionics fail and require maitenance that they would
have to pay for it they didn't "upgrade"
I approached the issue the same way you are approaching it. I needed an
airplane with more capability, decided that the MU-2 fit the role best and
went and recieved the nessesary training.
Mike
MU-2
--
Mike Ciholas (812) 476-2721 x101
CIHOLAS Enterprises (812) 476-2881 fax
255 S. Garvin St, Suite B
Evansville, IN 47713 http://www.ciholas.com