View Single Post
  #6  
Old February 11th 04, 12:48 AM
Matthew P. Cummings
external usenet poster
 
Posts: n/a
Default

On Sun, 08 Feb 2004 17:02:19 +0000, G.R. Patterson III wrote:

Less than that. IIRC, the seat itself weighs about 25 pounds. It does come out
easily.


~11 lbs and it can't come out without a logbook entry because you'll have
to redo the W&B, but you're right in that it's only a couple screws and
bolts and is easily done. It's not a common option.

My plane has one in it. That area of the plane is also limited to 120 lbs
but then if you filled all the seats to max you'd have to make airplane
noises because you sure couldn't run it without fuel.