View Single Post
  #6  
Old March 25th 04, 12:15 AM
John Galban
external usenet poster
 
Posts: n/a
Default

(Michael) wrote in message . com...
First off, there never was a bungee interconnect. The TriPacer has
(by default - there is an STC to remove it) a spring interconnect
between the rudder and aileron cables located directly aft of the
baggage compartment. The Pacer does not.


This brings up an interesting question. Most folks I know that have
converted Tri-Pacers to taildraggers now call them Pacers. I believe
there are more PA22/20 conversions than there are actual PA20s. That
being the case, do you know if the PA22/20 conversion removes the
interconnect? If not, the I'll bet a lot of "Pacers" could be said to
have the interconnect.

John Galban=====N4BQ (PA28-180)