On Tue, 6 Jul 2004 13:45:28 -0700, "NW_PILOT" wrote:

That would be nice to do but this is a Cessna 150 and my panel is full, I
was thinking above the compass see hand held photo
http://www.warflying.net/sm3.jpg I could faberacate a mount that could use
one of the holes for the compass


I appreciate the problem but the Skyforce so near to the compass would
no doubt require a compas swing. Additionally the wiring is likely to
induce changes in the magnetic field as the GPS draws more or less
current. I suspect the compass variations would not be acceptable!

We had to use a VOR/ILS indicator with DME built in as the panel space
would not accommodate the DME when we fitted dual NAV/COM.

Good luck.


David

E-mail (Remove Space after pilot): pilot