Hey Jim Thanks!

Maybe I should just build him a generic dipole out of wire or copper tape.
How do you get the bandwidth wider, use a wider conductor?

Also, my only vswr meter is a old radioshack one for use in the 10 meter
range, can I retrofit it to work in the 120 mhz area?

Thanks as always

Dave


Jim Weir wrote:

If you are talking about one of those old 3/16" stainless steel whips, yes you
do need a connection between the center pin of the RF connector and the element.

You also need a ground plane directly at the base of that antenna if you are
mounting the antenna in a plastic location.

If you plan on using that antenna with a good radio, do yourself a favor and
save your friend a lot of grief by using the antenna as a doorstop. The VSWR at
the band edges with that sucker is something to behold. Remember, that antenna
was designed back in the days when 90 channels (118-127 on 0.1 MHz. spacing) was
just about airline quality.

Jim




dave
shared these priceless pearls of wisdom:

-I have a bent whip antenna that I'm about to mount in a friends Lancair
-and I'm wondering if I should see any connectivity between the center
-conductor of the BNC connector to the stainless steel element?
-
-The ohmmeter shows nothing.
-Is this thing have capacitance coupling?
-
-Thanks
-
-Dave


Jim Weir (A&P/IA, CFI, & other good alphabet soup)
VP Eng RST Pres. Cyberchapter EAA Tech. Counselor
http://www.rst-engr.com