On Sun, 18 Apr 2004 18:16:22 -0700, "WhiteKnuckles"
wrote:

Hi All,
I bought the above radio on Ebay for the ultralight that I am building.
Anyway, I'm hoping that I didn't do anything dumb in choosing this older
radio. I didn't receive any pin out information from the guy that sold it to
me, and I'm assuming that he just plugged a newer set into the existing
frame and may not know how the radio is plumbed. The radio has two 15 pin
single sided connectors. Can anyone help me with pin out info? I went to
Narco's site, but the com 11A wasn't listed.
Thanks,
Jim Burns


this is the pinouts for the old installation in my Tailwind.
btw the current installation is an Icom which must be the rolls royce
of panelmount radios.
anyway...
1 power ground
2 mic ground
3 phones
4 press to talk
5 speaker
6 speaker and phones ground
7 aux audio
8 low level audio
9 mic audio
10 dial lamps
11 intercom
12 switched something, may be Rt
13 +14v in
14 +14v in
15 not labelled.

heavens, never thought this would ever be useful.
Stealth Pilot
Australia