"Dave S" wrote in message
nk.net...
#1) Dont go skydiving without a parachute (that should be hitting close
to home if you fly where I think you do). Dont exit your own 150/2 in
flight without a qualified pilot at the controls either.

#2) Get a copy of the Cessna 150 Aerobatic Training Manual. Said book
may be out of print, but if you can find it it would be a good reference
for yanking and banking type stuff. I have my father's old copy that is
probably older than I am.

#3) Before continuing with said yanking and banking aspirations, head to
to LaPorte and get some aerobatic instruction or spin training. Even if
you don't ever intend to do such things in your own plane, its a good
exposure to just what kind of yanking and banking stuff is out there, as
well as how to recover when you overyank and over bank

Unfortunately, I can't go into any REALLY secret advice without the
secret handshake.

Dave

Disclaimer to the rest of the world: the above advice is predicated on
living in or near the Houston, Texas and being familiar with places of
business alluded to in items #1 and #3

houstondan wrote:
ok...as to flying c-150/172 type aircraft, what can you do, really,
that's fun and won't hurt the airframe? at 80mph, can you really hurt
the machine with full control deflection? i guess that's what i'm
asking ... how much can you "yank and bank" these things before bad
things happen? i can get a real good feel for the slow flight
characteristics by trying it at altitude. a can't think of any way to
test airframe without testing to destruction....mine. exactly how do
you do those rolls???

i know i'm begging to hear a lot of "never do that", well-meaning
warnings but there has to be some tribal wisdom on "how much can you
do?"


dan

Your question has already been answered, and it sounds like you are
determined to go ahead with a bad decision. good luck.
Clyde