I have read your post and there are two possible problems:

1. For Winpilot you need only one way connection. Because of that some
installations have only transmit and ground line connected from the
instrument. For DownLoader you need both transmit and receive.

2. If you are using standard PC transfer cable to connect to the cradle
cable your first problem is that DB9 female connector is on both sides. You
can not use the gender changer adapter, because you will be connecting wrong
pins. You have to use null modem adapter.

Regards

Uros

www.flyWithCE.com


"Ted Wagner" wrote in message
news:MbVbc.39723$wl1.29922@fed1read06...
I'm new to both of these products, and I'm a bit perplexed about a
connection question.

My iPaq has a cradle added to the glider by the previous owner, who like
myself, ran WinPilot. The iPaq receives the GPS's NMEA stream from the
cradle's connection to the LX5000. Works great, no problem. I expect
SeeYou
Mobile, which I'm now starting to play with, will see the same NMEA stream
on the same comm port and be just as happy.

But when I tried to use the "Downloader" program on the iPaq in the same
cradle, it couldn't establish a connection with the LX5000, and some stuff
I've seen on the web talks about using a null modem cable adaptor and the
LX5000's other 5-pin connection on the instrument panel. Why
wouldn't/couldn't Downloader use the same connection that the GPS stream
uses? Is it simply a matter of that connection being dedicated strictly to
GPS data?

-ted