On Mon, 07 Mar 2005 13:07:25 +1100, jc wrote:
///
A lot depends on the range of frequencies, any sensor will have its own
fundamental frequency- multiple sensors may be a good idea. Geophones seem
to be good up to a few hundred Hz, cheap but difficult to get qty one. For
the application a speaker may be the clue (as a second sensor).
Building on this idea - it appears that piezo speakers with a loaded
wafer have done well in this application.
I'm guessing that loading the ceramic to a natural frequency well
below 40Hz would be good. The output is a function of acceleration
of the casing, I imagine.
Brian Whatcott Altus OK
|