jcpearce wrote:
As a pet/learning project I made a data aquisition unit using an 8051
microprocessor and an EPIA M motherboard running a variant of Linux
to
process and display the information. It all works but the EMI from
the
EPIA M causes way too much noise to the aircraft radios. I have tried
shielding the whole device in an aluminum case with very little
improvement.

Any ideas on how to smother the EMI or some other small motherboard
which may not have as much an issue (as a test I took my portable
aviation radio and within 6' of any my home computers the same occurs
which gives me little hope)

Thanks

Hi, JC
Here's a couple more ideas on containing signals in the box. First,
have plenty of closely spaced fasteners along the joints; not just in
the corners. Second, the thin copper desoldering braid makes a fairly
good RF gasket. 'Best with your project! Paul