Jim,

Not to be to critical, but you should be thinking on a bigger
scale for Jay. Something along these lines :-)

http://www.pilotmarket.com/category/...and_Hangars/6/
http://www.airplanehome.com/
http://cgi.ebay.com/ebaymotors/ws/eB...tem=2485893359

Ronnie


"RST Engineering" wrote in message
...
Jay --

Some time ago there was a thread in this ng about what sort of light
aircraft on a pole ("pig on a stick") would be appropriate for your
establishment. That thread sort of bogged down...

Just for grins, go to http://www.rst-engr.com/weathervane/ and think
about making a 4x or 8x model of this thing. It is the
July/August/September Kitplanes project column device.

Note the red/green wingtip lights, the white tailfeathers light, and the
red flashing rotating beacon atop the vertical fin. While I used plain
old T1 size LEDs on this little rascal for weight, we could use the moosey
stoplight size on a larger model.

I can design the electronics if you can get somebody in your neck of the
woods to do the woodwork and metalwork. I used an off-the-shelf gas
engine model airplane propeller for the model; you will have to do some
thinking about what you want to use on a larger model. Yes, the prop
spins in the slightest breeze.

Jim