In article .com,
writes
My Becker radio stopped working recently and I'm trying to determine
what to do next. It transmits a carrier tone when the mic is keyed,
but no voice. Any speculation on what is most likely the problem? The
wires that go from the mic to the D connector on the back of the radio
test positive for continuity.

I assume the Becker USA office in Florida is the best place to have it
sent, if necessary?

-ted/2NO

Our Dittell clone had the same problem. It turned out to be a bad mic.
connection to the terminals on the radio itself. Gave them a little rub
with fine sandpaper, now all is well.
--
Mike Lindsay