This is the obsolete prop listing for Propellors. The Type Certificate is presently held by Tarver. I believe the A goes with the 72 or model 72A and it is rated at 90 HP at 2650 continuous
SOUTH 80 AVIATION (FORMERLY UNIVAIR, UNIVERSAL, MILLER, AND FLOTTORP) - Model - ALL WOOD PROPELLERS
Maximum Hub Drilling Hub Dimensions
Cert. Continuous Std. No. Dia. Dia.Bolt Thick- Wt
Model Basis HP RPM Dia. Pitch Holes Holes Circle Dia. ness (lb.) Notes
63L TC 802 70 2700 63" 54"-60" 6 3/8" 4-3/8" 6" 3-1/4" 8 3,4,5,6,7
65A TC 802 70 2500 65" 68"-58" 6 3/8" 4-3/8" 6" 3-1/4" 9 3,4,5,6,7
69A TC 802 80 2700 69" 56"-30" 6 3/8" 4-3/8" 6" 3-1/4" 9 3,4,5,6,7
69F TC 802 80 2700 69" 56"-30" 6 3/8" 4" 6" 3-1/4" 9 3,4,5,6,7
69L TC 802 80 2700 69" 56"-30" 6 3/8" 4-3/8" 6" 3-1/4" 9 3,4,5,6,7
72A TC 802 90 2650 72" 54"-39" 6 3/8" 4-3/8" 6-1/8" 3-1/4" 10 3,4,5,6,7
72AB TC 802 85 2575 72" 44"-34" 6 3/8" 4-3/8" 6-1/4" 3-1/4" 10 3,4,5,6,7
72K TC 802 75 2650 72" 57"-39" 6 3/8" 4" 6-1/8" 3-1/4" 10 3,4,5,6,7
72KA TC 802 90 2550 72" 54"-48" 6 3/8" 4" 6-1/8" 4" 10 3,4,5,6,7
73B TC 802 135 2600 73" 64"-38" 6 3/8" 4-3/4" 6-1/8" 3-1/2" 11 3,4,5,6,7
74A TC 802 90 2650 74" 54"-39" 6 3/8" 4-3/8" 6-1/8" 3-1/4" 11 3,4,5,6,7
74AE TC 802 75 2300 74" 57"-39" 6 3/8" 4-3/8" 6-1/8" 3-1/4" 11 3,4,5,6,7
74B TC 802 135 2600 74" 64"-38" 6 3/8" 4-3/4" 6-1/8" 3-1/2" 11 3,4,5,6,7
76CB TC 802 150 2600 76" 58"-48" 8 3/8" 5-1/4" 7" 4" 14 3,4,5,6,7
NOTE 3.
Bolt holes may be counter-drilled for mounting on hub flange having bolt-hole bushings.
NOTE 4.
The letter "D" following the pitch number in the model designation indicates that the propeller is fabricated from 1/16" laminations.
NOTE 5.
The letter "E" following the pitch number in the model designation indicates that the propeller is fabricated from 1/8" laminations.
NOTE 6.
The prefix "F" to the model number designates that the propeller has a reinforced plastic leading edge, and no metal tipping.
NOTE 7.
The letter "Y" or "Z" following the propeller serial number indicates that the propeller is plastic covered.
"Heino & Deanne Weisberg" wrote in message ...
Does anyone know who might have manufactured a prop with the following #'s:
A 22260 Y
72 A 43
TC 802
PC 406
There is no manufacturer stamped on the prop.
Any help would be greatly appreciated.
Thanks
Heino
|