Hey, for all you folks talking about small transformers and signal diodes to
do the job, note the OP said he needed 75 watts. With normal conversion
efficiencies, this is about 4 or 5 AMPS from a 24 volt supply. We ain't in
small signal land any more, Toto.

Now, to the OP: What makes you think you need that much wattage to spin up
a small gyro motor?

Jim



In article . com,
wrote:
I've got an ARU 44 gyro and I'd like to power it off my 24VDC system.
It needs 115VAC 3 phase, and about 75W to 100W. Is there an off the
shelf unit that can do this, or maybe someone knows of a schematic to
build my own? I'm an electronics engineer so I can do this, but
inverters are not my specialty so any guidance would be greatly
appreciated.