We have a SZD 55 that was purchased with a aerotow
hook only, the fittings for the mounting of the hook
on the U/C leg and the cable guide on the wheel well
were already there (factory)
The problem we have.on fitting the winch hook....is
the range of movement of the 2 hooks is hugely different,
Both are the correct Tost hooks
We can operate the Aerotow OR Winch hook independently
without problems, however when connecting them in unison,
the aerotow hook range of movement ,restricts the winch
hook...
So anyone got a good photograph of the aerotow hook,
lever assy and cable routing please