wrote in message
ups.com...

Lou wrote:
Is Ceconite and Peel Ply the same thing?
--------------------------------------------------------------------------

Yes. You may also use generic '100% polyester' or 'Dacron' (DuPont's
brand name for 100% polyester fabric). Select the fabric weight
according to the 'tooth' required; the lighter the weight of the
fabric, the finer the weave. Most use the heavy (3.7oz) fabric for
peel-ply on hand lay-ups but there are literally hundreds of different
weaves/weights available and anything other than knits will serve as
peel-ply. If vacuum bagging be careful not to use too light a
peel-ply. When completely encapsulated in resin 1.8oz dacron often
tears rather than peeling.

Some shops reuse their strips of peel-ply but when making sections of
leading edge I got better results using a new strip for each lay-up.

-R.S.Hoover


There is a downside to what you are saying. Ceconite has surfactants and
"sizing" on it that has the potential to react badly with vinylester resins.
This stuff
isn't found on BARE CLOTH. Mr Hoover will is absolutely correct about
untreated polyester fabric, but I find that branded cloth isn't really a
good idea
as I have had problems with secondary bonds using Ceconite. YMMV.