"Gene Seibel" wrote in message
oups.com...

I was approaching Rockford frome the north and apparently nicked the
very edge of Janeville Class D while talking to Rockford Approach the
whole time and Rockford jumped all over me about it. There is something
weird going on with those two.


The Rockford controller was in error. He was required to coordinate with
Janesville tower.


FAA Order 7110.65P Air Traffic Control

Chapter 2. General Control

Section 1. General

2-1-16. SURFACE AREAS

a. Coordinate with the appropriate nonapproach control tower on an
individual aircraft basis before issuing a clearance which would require
flight within a surface area for which the tower has responsibility unless
otherwise specified in a letter of agreement.

REFERENCE-
FAAO 7210.3, Letters of Agreement, Para 4-3-1.
14 CFR Section 91.127, Operating on or in the Vicinity of an Airport in
Class E Airspace.
P/CG Term- Surface Area.

b. Coordinate with the appropriate control tower for transit authorization
when you are providing radar traffic advisory service to an aircraft that
will enter another facility's airspace.

NOTE-
The pilot is not expected to obtain his/her own authorization through each
area when in contact with a radar facility.

c. Transfer communications to the appropriate facility, if required, prior
to operation within a surface area for which the tower has responsibility.

REFERENCE-
FAAO 7110.65, Radio Communications Transfer, Para 2-1-17.
FAAO 7110.65, Surface Area Restrictions, Para 3-1-11.
FAAO 7110.65, Application, Para 7-6-1.
14 CFR Section 91.129, Operations in Class D Airspace.