"Keith W" wrote in news:dv134f$lf1$1
:


"Wake Up!" wrote in message
...
"khobar" wrote in news:kZBQf.392$PE.376
@fed1read05:

"Keith W" wrote in message
...

"Wake UP!" wrote in message
...
Video of THERMITE REACTION at WTC on 9/11
http://www.checktheevidence.com/911/Thermite.htm


I've seen and used thermite and thats not it, by the way you are
aware that thermite isnt used to demolish buildings arent you ?

Yes he is, but that's the beauty of his conspiracy - since thermite
isn't used for demolition, no one would suspect it being used. Har
har
har de har har.

Paul Nixon





As if that means anything, or has any bearing whatsoever. (I guess to
a
reality denier it might.) Can thermite partially evaporate steel? Yes.

No, at best it can melt it, most often its used for welding.



From Jones' paper:
The observed “partly evaporated” steel members is particularly upsetting
to the official theory, since fires involving paper, office materials,
even diesel fuel, cannot generate temperatures anywhere near the ~5,180oF
(~2860oC) needed to evaporate steel. (Recall that WTC 7 was not hit by a
jet, so there was no jet fuel involved in the fires in this building.)
However, thermite-variants, RDX and other commonly-used incendiaries or
explosives (i.e., cutter-charges) can readily slice through steel, thus
cutting the support columns in a controlled demolition, and reach the
required temperatures. This mystery needs to be explored – but is not
mentioned in the “official” 9-11 Commission or NIST reports.




Could thermite cause the temperatures that existed in metal at the
WTC?
Yes.

As can burning office furniture, this was presen in huge quantities.
t
Can thermite cause metal dripping like in the videos? Yes.

No, thermite produces molten iron, the metal in the video was aluminium


From Jones' paper:
The yellow color implies a molten-metal temperature of approximately 1000
oC, evidently above that which the dark-smoke hydrocarbon fires in the
Towers could produce. If aluminum (e.g., from the plane) had melted, it
would melt and flow away from the heat source at its melting point of
about 650 oC and thus would not reach the yellow color observed for this
molten metal. Thus, molten aluminum is in fact ruled out with high
probability. But molten iron with the characteristics seen in this video
is consistent with a thermite-reaction attacking the steel columns in the
Tower, thus weakening the building just prior to its collapse, since
thermite produces molten iron at yellow-to-white hot temperatures. (As
some of the molten metal hits the side of the building in the video clip
above, note that the white-hot interior is exposed.) The reader may wish
to compare the dripping molten metal observed on the corner of the South
Tower just before its collapse with the dripping molten metal from known
thermite reactions: http://www.checktheevidence.com/911/Thermite2.htm .





Were
those tree items present at the WTC? Yes. I love the way you deniers
aren't able totake everything into context, and instead give silly
reasons for each and every piece of information, so you can hold on to
your absurd government conspiracy theory. LOL!!

I am not the person pushing the absurd government conspiracy theory.

Keith




I encourage you to look into this deeper. Here's some interesting
information. (Scroll down for 115 ommissions in the government reports):
http://www.serendipity.li/wot/571-page-lie.htm