"mhorowit" wrote in message
oups.com...
| Somewhere I read about a welding exercise where the student built a
| tube frame of some sort, pressurized it, checked for leaks, then
| smashed it flat and rechecked for leaks.
| I've looked thru my books but can't find it. Anyone recall where I can
| find a description of the exercise? - Mike
|

My instructor had me butt weld some tubing in a vertical as well as a
horizonal position. Then grind off the weld until flush with the surface
of the tubing. Then cut the tubing into strips across the weld
approximately 3/8" wide. Then clamp each strip in a vise about an inch
away from the weld and bend the tubing back and forth until it breaks. A
break outside of the weld is a passing grade. A very humbling experience
at the time.

--
Jarhead




----== Posted via Newsfeeds.Com - Unlimited-Unrestricted-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---