View Single Post
  #4  
Old August 6th 06, 12:18 AM posted to rec.aviation.ifr
Sam Spade
external usenet poster
 
Posts: 1,326
Default Help understanding Aspen VOR/DME approach

Paul Tomblin wrote:
In a previous article, said:

The plate is here-
http://www.airnav.com/depart?http://.../05889VDGC.PDF

While trying to fly the approach in the sim I flew to the MAP with
relative ease but had trouble getting low enough to make the runway
without getting too hot. Looking at the plate it seems a drop of 2380'
must be made between MAFMU and the runway in a lateral distance of
1.4NM, this is a descent angle of 15 degrees!



Well, yes, if you don't see the runway until the MAP and then want to land
on the runway ahead, you will have a very steep descent. But there are
two factors mitigating that:
- you might see the runway earlier and
- it's a circling approach, so you can circle around airport to descend if
you need to.


At Aspen, circling around the airport is very risky business.