Garmin 396 496 Data Connector Wiring Standard
Fixing a typo: the DC input wire (Pin 1) is red!
mikem wrote:
I am in the process of wiring a Garmin 496 into my 182, using the
. . .
__________________________________________________ ____
GARMIN 396/496 DATA INTERFACE CONNECTOR WIRING
(Using Garmin 010-10513-00 Power/data cable and
hooded Male DB-9 connector) MGM Oct 24, 2006
Pin#.Color..Description
------------------------------------------
1....Red....DC input
2....Wht...Alarm (active low)
3....Brn....Voice+ (Bitch in the box)
4....Blu....Port 1 RS232 Out
5....Vio....Port 2 RS232 Out
6....Blk....Common ground
7....Org...Voice- (Bitch in the box)
8....Yel....Port 1 RS232 In
9....Grn....Port 2 RS232 In
Please disseminate this as widely as possible.
Mike Mladejovsky
__________________________________________________ ______
|