Andy,

The pressure requirements are the same on the new O2D1 units. I would
set your nelson to 30 psig static, but It is best to set the flowing
psig.

The details of the Special will be on my web and can be purchased on
my site or call. You don't need to be at the Convention.

Richard
www.craggyaero.com





On Jan 28, 10:11 am, "Andy" wrote:
On Jan 28, 7:43 am, "Richard" wrote:

Andy

1 bar (15 psig.) DYNAMIC (flowing) through cannula and 1.5 meters (5
ft.) of 4 mm. inlet tubing
2 bar (30 psig.) STATIC (non-flowing) 2.2 bar (35 psig) MAX.Thanks Richard,

I found those figures for the older unit on the MH website but could
not find a data sheet for the new model. Why such a big difference
between static and flowing? That looks like a poor regulator
characteristic. Can I assume that if I set my Nelson regulator to
25-30psi static I should be ok.

I'll be in Memphis this week but probably not for the week of the
convention. Please email me your special price and maybe one of the
AZ pilots could collect it for me.

Andy