"Rich S." wrote in message
...
"Frederick Wilson" wrote in message
news:FmC9b.365132$Oz4.142857@rwcrnsc54...
I am still working on home remodel so it will be some time before the
airplane gets started. I am pretty darn convinced that I am going to do
an
all wood and fabric airplane. More than likely, the Fisher Tiger Moth.

Anyway, I have come to the point in my home remodel that I am going to
need
an air compressor. But instead of just getting one that will do the job
here, what might I need one for when it is airplane time?

What size and compressor (one or two cylinder) should I look at?

Any name brand preference?

Whichever model you choose, be SURE to listen to it run before you plunk
down your money. Some of the new compressors are loud enough to shred your
neighbor's panties.

Rich S.

Part of the things to consider is if you will use a lot of air tools, or go
electric. For a wood airplane, I could see a bit of sanding, and spraying
finish. A small 30 gal 3 HP compressor would not keep up with a air sander,
or spray gun very well. I like air tools cause they are usually cheaper,
lighter, and don't get hot under heavy usage.

If you can swing it, get a big upright 5 HP , NOT oilless unit, and put it
outside if you can. It saves the ears and the space in the shop. All it
needs is a small lean-to roof.
--
Jim in NC