Jay Honeck wrote:

3. You want to check the runways at your destination airport, which is
NOT displayed. (Remember, you're zoomed in so that you can see stuff.)
The 496 has the runways stored in its database -- all you have to do
is put your cursor on the desired airport and hit "enter" to see them
all.

4. In order to click on the desired airport, you must "slew" the
cursor off the edge of the screen in order to find it. This means
hold the arrow button down, slew to the edge of the screen -- wait
three seconds while the screen disappears and reappears -- and
continue.

The REALLY bad thing is that the cursor doesn't stop moving when the
screen disappears, so that in those three seconds you can easily WAY
over-shoot your target airport. (I've even ended up in a different
state during the time it's blank.)

5. Repeat ad nauseum.

This process must be performed in order to see ANY of the good stuff,
including accessing the AOPA restaurant/hotel guide, radio
frequencies, field elevation, airport diagrams, METAR and TAF weather
-- you name it, you've got to put your cursor on the airport and push
"enter" to activate it -- which means slewing.




RTFM. Press and hold the Direct To button. There's your menu.