View Single Post
  #2  
Old July 22nd 07, 03:02 AM posted to rec.aviation.homebuilt
Charles Vincent
external usenet poster
 
Posts: 170
Default Welding tank problem

cavelamb himself wrote:
I seem to have a problem here.

Victor F-100, 0, 00, and #3(?) tips (aircraft project stuff),
regulators, small dia hoses, and tanks in a dolly.

No, the rig works fine, but I'm moving into a rental house and noticed
in the lease a clause prohibiting storage of flammable or explosive
materials.

Small amounts of ammo (less than 2000 rounds per piece are deemed ok,
but the acetylene tanks might make the insurance company itchy, so...

So, anybody in the D/FW area who would like have this rig?

Tanks were last exchanged in 05.

I don't recall the correct size designations.
O2 is ~5' tall, Acetylene is about 3.

What would it be worth in cash or trade?

Richard




It sounds like the tanks you have are too large to be owner tanks in
Texas, so get your deposit back on the tanks from whoever actually owns
them. Store the torch till you need them again. I am in DFW area and
interested if you really want to get rid of them and they are owner
tanks. If they are owner tanks, most places will take your tanks in
exchange, so they may buy them as well. What area are you renting in?

Charles