On Nov 6, 8:27 pm, Ernest Christley wrote:
Ken Gage wrote:
Hi Folks,
Could any of you point me in the right direction?

It is my goal to outfit my project with LED lighting. The wingtip
architecture dictates I use a specific light assy.

Each wingtip would use:

A625 strobe
W1250PR1
W1250PG1

and the tail:
A555AV14

---------------------------------
Are there any LED options out there?

Thanks,
Ken

With modern, high-powered LEDs, the only thing limiting your options is
your imagination. Some people have demonstrated, and some are selling
kits for arranging LED by bending them on their leads than then potting
them into place.

I demonstrate on my website how to orient individual LEDs by embedding
them in a piece of plexiglass. The same technique could be used to
embed the LEDs directly into a wing.

http://ernest.isa-geek.org/Delta/Exp...iment_LED.html

I glassed a length of 3/8" clear tube into the dash of my panel. Made
of "string of perls" from LEDs and ran it through the tube. It cost me
all of $5, but it's S-C-H-W-E-E-T. I'm going to do the same for the
'passenger compartment' and baggage areas.

http://ernest.isa-geek.org/Delta/Pic...lumination...- Hide quoted text -

- Show quoted text -

Check out ULTRALIGHT EPL WING TIP LIGHT SET at Aircraft Spruce.

Might be what your looking for.