Thread: Why a triplane?
View Single Post
  #6  
Old February 3rd 08, 03:38 PM posted to rec.aviation.piloting
Bertie the Bunyip[_24_]
external usenet poster
 
Posts: 2,969
Default Why a triplane?

FledgeIII wrote in
:

On Feb 3, 6:51 am, Bertie the Bunyip wrote:
FledgeIII wrote
innews:229c0d8d-7fae-4be0-8c58-


om:

On Feb 2, 7:41 pm, Bertie the Bunyip wrote:
FledgeIII wrote
innews:7921eb53-dcc7-4bce-984a-






om:


On Feb 2, 4:38 pm, Ron Wanttaja
wrote:
On Sat, 2 Feb 2008 09:44:56 +0000 (UTC), Bertie the Bunyip
wrote:


Ron Wanttaja wrote in
:


One would have thought the Fokker D-6 (essentially a
biplane DR-1) would have quickly superseded it, then. But
I suppose Fokker finally getting the Mercedes engine let
him jump to the bigger D-7.


I don't think the D-6 was quite as good as the Albatros, but
it was probably better than the Triplane in most ways. I
think the Triplane had it;s limited success as a sort of
accident. Fokker was fond of just grabbing bits they had
developed and grafting them to other bits and then
lengthening this, shortening that until he came up with
something that worked.


I heard once that Tony Fokker (a Dutch national) was somehow
under suspicion by the German government, and the military had
refused to give him access to the newest engines...so he
designed the best fighters he could around an old one until the
Germans changed their minds.


I always loved the japanese kite face on Voss's airplane.


Back in the '60s, DC Comics had a series about a German WWI
pilot called "Enemy Ace," which was based on Richtofen. But
"Hans Von Hammer's" all-red triplane featured Voss' kite face,
as shown on the current image on my Fly Baby's baggage door:


http://www.bowersflybaby.com/pix/enemy%20ace.jpg

One last bit of DR1 lore is that Manfred von Richtofen had
four of them. He also preferred the French Gnome engine over
the Oberursel whaich was basically a copy of the Gnome
anyway. His airplanes were all equipped with Gnomes captured
form downed airplanes.


Well, uhhh, maybe. I'd heard that Oberursel sometimes put
Gnome data plates on its engines, with an additional plate
explaining it was a "captured" engine. Even in the middle of a
war, they were worried about licensing laws....


Thanks for the info about von Richtofen's four DR-1s. Back as
a kid building models, I noticed that none of the sources
seemed to agree as to whether his machine was all-red or
otherwise. Having more than one airplane would explain it....


Ron Wanttaja


In one out of the way corner in the WWI section of the USAF
Museum, there's a couple-inch square swatch of doped fabric in a
frame, purported to be from the DR.I Richtofen died in.


It's actually kind of a magenta color, but there's certain to be
some fading involved...


Yeah, it was ripped to shreds by souvenier hunters. Some if it is
in Canada in a museum there including the seat.
One of his tripes was preserved and displayed in a museum in
germany, but it was destroyed in a bombing raid during the war.


Bertie


I also seem to recall reading someplace or other that one of - if
not primary - motivations with tripes was to decrease span without
sacrificing wing area - shortening the moments to increase roll and
yaw rates.


Yeah, that would be one of the reasons. Bipes are the same lots of
wing area but you're affecting a smaller body of air. If you look at
an airplane nose on and draw a circel around it which just touches
the wingtips, you have a rough idea of the volume of air influenced
by the airplane as it flies along. A bipe or tripe will affect a
smaller area. It's morre compicated than that, of course, but it's a
good ROT

Kind of squares with stories of how guys like Voss flew the thing -
bat**** crazy; flat turns, snap rolls, you name it.


Yeah I read a report on a modern one years ago and apparently it's
yaw behaviour is very strange indeed. He said it was nearly
impossible to tell if you were skidding as the thing would just fly
along with the wings level and the ailerons neutral and going mare
sideways than straight ahead. You had to be on the rudder all the
time. Vigorous application of the rudder would initiate mad flat
turns of ridiculously small radius,whihc apparently made the thing a
very good gun platform. It must have been a tremedous advantage in
surprise terms alone.



Another thing I recall reading was that it offered some advantages
in visibility - high aspect ratio (narrow chord)/low stagger wings,
the middle wing aligned right on line of sight where it obscured
the least lateral vision.


Then again, I could be all wt on that...


As Dudley said, I believe you're completely blind on landing, but all
the bipes of tha era had vis issues. There were some weird
experiments n that direction as well. The DH5 used negative stagger
and had the cockpit in front of the wings, for instance. The Sopwith
Dolphin had a weird aproach that's hard to describe.

Bertie



Yeah I read a report on a modern one years ago and apparently it's
yaw behaviour is very strange indeed. He said it was nearly
impossible to tell if you were skidding as the thing would just fly
along with the wings level and the ailerons neutral and going mare
sideways than straight ahead. You had to be on the rudder all the
time. Vigorous application of the rudder would initiate mad flat
turns of ridiculously small radius,whihc apparently made the thing a
very good gun platform. It must have been a tremedous advantage in
surprise terms alone.


Wouldn't be surprised if that's the reason pictures from the time -
and later on in movies like The Blue Max show DR.Is with streamers
trailing from the interplanes; most likely as big 'ole honkin' yaw
strings...

Good point on the early D.VII fuselage; was thinking about that
myself. IIRC, the prototype had the same small "comma shaped" rudder
stab as the DR.I; they added the forward strake/fin when they
lengthened the fuselage.

I can tell you now as soon as I make a cup of tea and grap my "Big Book
of German Airplanes."

OK, back. Yeah, the first prototype of the D VII had a comma rudder. it
was called the V11. It was pretty much just a mercedes engined D VI. The
next version had the fin but the fuselage lengthening took place
overnight at Aldershof during acceptance testing of the airplane. That
airplane already had a fin. It's climb was impressive, BTW. 5,000 metres
in 25 minutes.

Incidentally i spottd a DR1 fitted with a Siemens Shuckert 11 cyl geared
rotary. That must have been some rocket!


Bertie