On May 23, 5:44*pm, Nick Kennedy wrote:
Does anyone out there know how to get the water ballast tanks caps off/open
to fill? *They have a 1/8 inch hole in them to spin the around, but several
us have tried to get them off/open but no luck..
TIA
Nick Kennedy

If they will turn, they should be able to be lifted out. The only
thing holding it in is a nylon 'cage' below the cap, that should flex
inward to allow removing the cap. It requires a stud to fit the hole
without much slop. Be careful because the 'cap' is somewhat fragile.