Preflighting my plane - Video
"Mick" @_#`~#@.^net wrote in :
wrote in message
news:f40edb8b-1cb7-43b6-9017-4d35ac42dea1
@e53g2000hsa.googlegroups.com.
..
Not quite sure I understand the above??
Obviously has something to do with the sump jiggies, and mine are
"spring loaded" and pressed in using the outer edge of the fuel sump
diddy rather then a center piece like a Cessna.
Does the style of sump make any difference?
-------------------------------------------------------
It's hard to imagine were every divot, rib, baffle, fitting or
fastener might be in a tank. Although the drain is in the designed low
point, droplets of water can cling to imperfections elsewhere.
Condensation also collects in the tanks unwetted areas, and doesn't
join the mix until splashed.
Carefully rocking the wings, from the wing tip, sloshes the fuel
around and helps rinse trapped droplets to the drain area.
Awww, you read my poast!
Good k00k!
Goog boi!
Here's a treat, fjukkktard!
Smakkkk!
Bertie
|