"Bertie the Bunyip" wrote in message
...
| "Mick" @_#`~#@.^net wrote in :
|
|
| wrote in message
| news:f40edb8b-1cb7-43b6-9017-4d35ac42dea1
| @e53g2000hsa.googlegroups.com.
| ..
|
|
| Not quite sure I understand the above??
|
| Obviously has something to do with the sump jiggies, and mine are
| "spring loaded" and pressed in using the outer edge of the fuel sump
| diddy rather then a center piece like a Cessna.
|
| Does the style of sump make any difference?
|
| -------------------------------------------------------
|
| It's hard to imagine were every divot, rib, baffle, fitting or
| fastener might be in a tank. Although the drain is in the designed low
| point, droplets of water can cling to imperfections elsewhere.
| Condensation also collects in the tanks unwetted areas, and doesn't
| join the mix until splashed.
|
| Carefully rocking the wings, from the wing tip, sloshes the fuel
| around and helps rinse trapped droplets to the drain area.
|
|
|
| Awww, you read my poast!
|
| Good k00k!
|
| Goog boi!
|
|
| Here's a treat, fjukkktard!
|
| Smakkkk!
|
|
|
| Bertie