View Single Post
  #9  
Old December 23rd 08, 02:32 AM posted to rec.aviation.homebuilt
Orval Fairbairn[_2_]
external usenet poster
 
Posts: 530
Default Quick-cure Epoxy

In article
,
Bob Kuykendall wrote:

On Dec 22, 6:13*pm, Orval Fairbairn
wrote:

It will disassociate in time into a jelly-like goo, with no strength.


Cite?

I have examples of 20-year-old bonds of 5-minute epoxy up at the shop,
and the bonds are still stronger than the substrate material.


I had some that turned to goo, just as I said.

A friend, who used to work at Stanford Research Center, researched
epoxies and told me this about quick-cure epoxies.

Another point is to watch the temperature on ambient-cure epoxies, as
they lose much of their strength above about 150 F.

--
Remove _'s from email address to talk to me.