"B A R R Y" wrote in message
...
Mike wrote:
"B A R R Y" wrote in message
...
Mike wrote:
There is nothing special about the Honeywell cable. I compared mine
to one purchased from them and it had the identical connector that I
used. If you are good with a soldering iron you can install the
connector in 15 minutes. It beats the hell out of buying one from
Honeywell. If you have the round connector, I can test my cable and
give you the pinou

Thanks for the offer, but that won't be necessary.

I found the KLN-94 installation manual online, and the update cable
diagram is in the book. I've never actually seen the cable, so I just
wanted to make sure there wasn't some crazy feature I might miss out on,
like a self-connection feature. G

I'm just curious if you have the 4-pin round connector on the aircraft
side.


It's a 4-pin, 3.5mm round connector that looks like a Nokia headset jack.

Ok, I know which cable you are talking about and it's a different, smaller
connector located on the bezel. I'm not sure which plug you'll need, but if
you can find out which one it is, you should be able to make one yourself
easily enough.