wrote in message
...
So buy a Flit gun and 5 gallons of kerosene. After using the lathe,
pump up the Flit gun and give the lathe a light coating of kerosene,
then cover it with a piece of canvas that is NOT allowed to touch any
unpainted surface.

I would buy a few oz. of kero and an old paintbrush, but if you really want
to spray, buy a Preval for about five bucks. Google for suppliers like
this:
http://store.fastcommerce.com/cat_Pa...FQIfswodKkp9bQ
or visit any automotive paint store.

Vaughn