On Mar 29, 9:17*am, Copperhead wrote:

Oddly enough I've had more fun researching and experimenting with
plans and parts building then I'd ever have thought possible and have
spent very little money so far. Mostly this has been due to the fact I
already have most of my woodworking power tools as well as a lot of
metal cutting and bending tools.
---------------------------------------------------------------------------------------------------------

Dear Joe,

Normally, when you have the option of building from either aluminum or
wood, you would opt for metal but there are a few cases where wood may
prove to be the better choice. In the mid-1930's Virginias Clark, the
fellow who gave us the Clark-Y airfoil, patented a process of making
plywood called 'Duramold' that was superior to aluminum in several
ways, but especially with regard to compound curves. Howard Hughes
acquired the rights to the process (I believe through Fairchild
Camera) and used it to produce the HK-1 'Hercules' -- which we
generally know as 'the Spruce Goose,' even though it is mostly birch.
The 'K' part of 'HK' referred to Henry J. Kaiser, who was supposed to
assemble the giant flying boat, Hughes to fabricate the parts.

One reason we've never heard much about Dura-mold is because of
fiberglas.... and a small Swiss company that came up with epoxy.
Combine the two and even a back-yard craftsman has the ability to
produce complex parts stronger than steel but weighing as much as two-
thirds less.

-Bob

PS -- I've got a hunch that threads such as this often turn into
something useful.