On May 1, 5:33*am, Charlie Papa wrote:
I bought a terrific unit from Wings and Wheels. *It is avaialble in
liters, resettable and compact. *The addition of some PVC fittings
gave me a garden hose connection with a shut off, and on the outgoing
side a 'T' fitting provides a standpipe to prevent overfilling
damage. *Yo0u can see it midway down the page athttp://www.wingsandwheels.com/page45.htm
.

I have the same electronic meter. I find it to be very repeatable but
not very accurate at the flow rates typically used to fill wings. If
you want to measure the same quantity into each wing it works very
well. If you want to meter a known quantity into each wing you should
probably do a calibration at the flow rate that will be used to fill
the glider.

The flow rate I achieve when filling with a bilge pump (approx 16 gals
in 9 minutes) is well below the calibrated range of the meter.

My weight and balance spread sheet includes the meter calibration. I
keep a graph of metered volume vs wing loading in the glider and use
that to set the glide computer.


Andy