You are more likely to kill yourself by leaving tools in the bottom of your
glider.


At 04:19 18 June 2009, Tim Taylor wrote:

I pulled the seat pan in my Ventus 2 for the first time to find the
relief tube housing to be a 10 inch long sharp ended aluminum tube
epoxied to the bottom of the fuselage. Needless to say if you have
one of these in your glider I encourage you to get rid of it ASAP. I
would hate to see what this would do in a hard landing. I cut mine
off a few inches off the bottom and installed a flexible vinyl tube to
replace the aluminum one. Not sure where this one was installed, but
I believe when the glider was in the UK.


http://picasaweb.google.com/TTaylor0...14503738989554